Forum Replies Created
-
Posts
-
Re: Bosch Aquasensor fault
Hi
You don’t mention the fault you have, but have assumed aquasensor fault 😕 These sensors rarely cause problems IMHO.
If you can provide the fault, just so we can make sure that you have the right advice to procede 🙂Greg
Re: Bosch SKT 2022 does not wash
Ive sent mine off to work, she didn’t do mine either 👿 :protest:
Greg
Re: Bosch SKT 2022 does not wash
Hi
Its possible that the wash pump has seized or jammed in someway.
With the applianced unplugged, you will need to re move that pump and check for free movement and debris.Greg
Re: QED ?
UPDATE
Basically told him we appreciate his input but to be safe and not to expletive when posting in main forums. If the insults get too serious or personal to contact one of the mods.
His reply …….helo_75 wrote:yer most people are fine
just some people are selfish ignorant tossers
they dont realise how long some of us have been doing the job , and thats frustrating
its a good site in my opinion, im sure you guys put a hell of a lot of time making this site what it is, and its still growing
thanks for letting me in, ive learned quite a bit, and i hope that my input has helped as well
rob (comet skivvy)
Nuff sed, bless 😀Greg
Re: QED ?
In a PM to me as I did ask………
helo_75 wrote:i think hes stopped now
it was the idiot who was taping the fan to the inside of his samsung fridge
i think he took it as a personal slant
not to worry, i just ignored him, he seems to have gone away
thanx anyway
Greg
Re: Single (Bosch) Oven Installation?
Hi Shaun
You should have had an installation sheet which will tell you what the ventilation criteria is and that it requires a 20A 2-pole spur for a feed.
Have sent you an copy via email for your fitter/electrician 😀Greg
Re: New Machine… 1
iadom wrote:
gegsy wrote:
Will have a play with it as Sean has it in the workshop 🙂
Oooh Matron, 😯 😆
Its never too early for a Carry On moment is it Jim 😆Greg
Re: New Machine… 1
Usually, like you said Jim, if you select a 90 wash you would be able to select that temp and below. Likewise on say a 60 you would be able to select that temp below but not above, as it would be pointless. It also guards against little fingers adjusting the temperature during a wash.
Will have a play with it as Sean has it in the workshop 🙂Greg
Re: whirlpool workshop manuals
Hi C
Its not that we dont want to help, its the fact that we have rules and legal red tape in this country as regards to copyright material.
The U.S have different regulations as ourselves, hence the information you require being available.
Hope that clarifies that for you. 🙂Greg
