[gegsy]

Re: neff canopy

yes 😉

[gegsy]

Re: Bosch KGV3104GB/04 Problem

EricT wrote:I am puzzled; why would the light stay on at about 50{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} if the ambient temperature is low?

The reason being that the appliance only has one compressor therefore if the ambient temp is the same as the fridge cavity temp, then the appliance has no need to switch on. That also means that the freezer will be off; you guessed it, defrost. By leaving the interior lamp on 50{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}, that is enough to raise the temp in the fridge cavity to cycle the appliance thus allowing the freezer to stay frozen, when appliance is in a cold environment.

Greg

[gegsy]

Re: QED ?

Works for me :p45: :tup:

Greg

PS – Optomist next?? 😆

[gegsy]

Re: bosch kim30443gb/01 fridge/freezer problem – please help

Hi Simon
Yes better switch off to reduce any un-necessary wear on compressor plus wastage of your electricity 😉

Greg

[gegsy]

Re: bosch kim30443gb/01 fridge/freezer problem – please help

Hi
If you can hear the motor (compressor) running constantly without any freeze or chill, then you are most definately looking at a system fault whether it be low refrigerent,blockage in the system or weak compressor.
In any case its out of the realms of this forum and you will have to consider an engineer.

Regards

Greg

[gegsy]

Re: QED ?

Another one 😀 Optomist for some reason is ringing alarm bells aswell.
Polite or not he is too weird, like Jims guy.

Greg

[gegsy]

Re: neff canopy

Metal arm comes on microswitch (no comments Jim or Dave 😀 )

Greg

[gegsy]

Re: Slimline Philco

:shutup: :look:

[gegsy]

Re: Slimline Philco

iadom wrote:What he said… 😆

Je ne vous connais pas le supporter d’une équipe trichante de football 😉 😆

Greg

[gegsy]

Re: Bosch SGS56E02GB/35 Leaks

Hi
Spray arm/s getting obstructed by wash load, firing the spray constantly at the door; it will give in eventually and leak.
Check the lower door seal as it has a tendancy to come off the door well, the new ones are of a different design.
Greg

[gegsy]

Re: Lidl Bargain

iadom wrote:My ‘special tool’ for that job cost me nothing at all, over 35 years ago, still in perfect order

Oh Matron 😀 😯 :conf:

Greg

[gegsy]

Re: Belling Dishwasher IDW603 Instruction Manual

Hi

We are open:
Monday to Friday 8am – 6pm
Saturday 8.30am – 2pm
Sunday 10am – 2pm

Belling Customer Care
0871 22 22 503
Consumer Product Info Helpline 0871 22 22 635
Spares Direct 0871 22 22 506
Cooker Care Products 0871 22 22 655
Warranty Register 0870 240 1914

You can write to us at;
Belling
Glen Dimplex Home Appliances Ltd
Stoney Lane
Prescot
Merseyside
L35 2XW

or email us at belling@gdha.com

Good luck
Greg

[gegsy]

Re: whirlpool workshop manuals

Hi shackec
Please may I refer you to http://tinyurl.com/mq8g3
If you are in the trade and in need of trade access then please go here http://tinyurl.com/3a8rd7
Regards

Greg

[gegsy]

Re: Bosch wont empty?

Hi Jim
In one of the spouts off the drain pump,you may find a 5p or button which fits perfectly in the bore. It then proceeds to act like a flap. best way is drain down, remove the two hoses from top of pump and push your finger down to plop it into main pump housing area.

Greg

PS – You have been missing something for years :snigger:

[gegsy]

Re: Bosch WFF1201 clicking through program.

Hi
This has no optical fault indication.
I would check the filter,pump and drain because if the appliance has a problem with removing water within 6 minutes, then the machine will fault into the off positon as described by the customer 😀

Greg

[Author]

Posts