Forum Replies Created
-
AuthorPosts
-
gegsy
ParticipantRe: Broken freezer flap
If its not there try emailing spares@ukwhitegoods.co.uk , we will always endeavour to find what you need 😉 😀
Greg
gegsy
ParticipantRe: Broken freezer flap
madrat wrote:A new flap is around £10 from e spares.
So what is wrong with our lovely shop@ on the left menu ?? 😀
Greg
gegsy
ParticipantRe: Barclays Premier League 2007-2008 / Champions League
Unlucky for Riise 😥
Yawn, this Man United match is crap compared to last nights match.
Thank god Barcelona put Thierre on 😆Greg
gegsy
ParticipantRe: Whirlpool t/l 3RLBR8543JQ0
Gearbox shaft should not turn in either direction by hand.
Greg
gegsy
ParticipantRe: gas hob ignitors???
Its magic our Morris 😆
Greg
gegsy
ParticipantRe: gas hob ignitors???
Hi
I think its worth a read <a href="http://www.ukwhitegoods.co.uk/modules.php?name=Forums&file=viewtopic&t=29558&postdays=0&postorder=asc&start=0
” target=”_blank” rel=”nofollow”>here as Lawrence mentioned 😉Greg
gegsy
ParticipantRe: bosch condenser dryer (intergrated)
You could try some contact cleaner on the rotary switch contacts 😀
Failing that you will need one of these, 096563; the selecor pcb behind fascia.Greg
gegsy
ParticipantRe: Bosch WFL2066GB/08. lights flashing
Certainly sounds like it Jim 😉
Greg
gegsy
ParticipantRe: Bosch WFL2066GB/08. lights flashing
If we had correct model number as the /?? is important :rolls: 😉 We could always blame Martin for the wrong info as he suggested it was an /08 😆
WFL2066GB/06 is different from the /08, so assume below 😉
Fault on this model would be indicated in display F0 etc.
I would now assume PCB fault if lamps are flashing.You have mail 😉
Greg
gegsy
ParticipantRe: Favourite old adverts
Iron Bru, made from girrrders was what I was thinking or Walkers crisps……….yerr no be havin a sale will ye 😆
Greg
gegsy
Participanteastlmark wrote:anyone see Nick Cave on johnathan Ross?
😯 BBC standards are slipping 😆
Greg
BTW NO i didnt, I do like his stuff though 😉
gegsy
ParticipantRe: Recommended Listening
Freebird was better 😉
Now Cream………………now there is a class group 😀Greg
gegsy
ParticipantRe: NEFF MICROWAVE h7871nogb
In instances of HT problems, I usually change the diode,limiter and HT capacitor.
Also there is a 1.25 A LT fuse on pcb that can go west so if you are not getting any voltage to HT TX as Phidom said, that may be the reason.HTH
Greg
gegsy
ParticipantRe: bosch wft 2800
Penguin45 wrote:You should have ordered 096805 ?
Which has since had a part number change to 496876
Greg
gegsy
ParticipantRe: bosch WFT2800GB/13 FD
No thats the only ones.
what is you water pressure like? Can you hear it whooshing in when you start a wash or rinse off?
If not, it could be a a kinked hose if the hose filters are clear.
Can also be a blockage in the water level pressure systemGreg
-
AuthorPosts
