gegsy

Forum Replies Created

Viewing 15 posts - 6,391 through 6,405 (of 6,724 total)
  • Author
    Posts
  • in reply to: Siemens HB86K570B interior glass shattered #149598
    gegsy
    Participant

    Re: Siemens HB86K570B interior glass shattered

    Not a common fault and must be isolated.
    BSHman maybe able to shed more light on it if he reads this.

    Greg

    in reply to: Bosch WFF2000 PreWash Light Flashing (again…) #149007
    gegsy
    Participant

    Re: Bosch WFF2000 PreWash Light Flashing (again…)

    In past experience changing the pump has cured this fault. Pump tends to misbehave after its been subjected to a wash ie heat; tends to make it seize and un seize.
    Occassionally had 5p (perfect size) get wedged in spout at top of drain pump (which feeds drain hose) making it act like a throttle. Worth a check. Remove drain hose from top of pump (after draining sump down) and poke your finger down spout , if coin present will fall into impeller area.

    Please unplug before you attempt this :plug:

    Greg

    in reply to: Fawkandles #149456
    gegsy
    Participant

    Re: Fawkandles

    Comedien and a gentleman, not many left. Funny without profanity, Chubby Brown could learn a bit from his humour.

    Thanks Chris for the link 😆

    Greg

    in reply to: BIG BILLS #149183
    gegsy
    Participant

    Re: BIG BILLS

    I bet there are a few quivering a@rse cheeks in the land of the big boys.

    Project X Team :tup:

    Greg

    in reply to: Neff Fridge/Freezer ice Maker won’t stop #148115
    gegsy
    Participant

    Re: Neff Fridge/Freezer ice Maker won’t stop

    Sometimes the bar where it inserts into ice dispenser mechanism can pop out un detected but still give the appearance that its still activating switch inside mechanism.
    If you find the bar is in correct position, then it can really only be a faulty dispenser unit.

    As for flushing I must be honset Ive never had one left with water in reservoir, so pass on that sorry.

    As always unplug before attempting any work on the appliance :plug:

    Greg

    in reply to: Bosch WFF2000GB/01 motor speed fault #146949
    gegsy
    Participant

    Re: Bosch WFF2000GB/01 motor speed fault

    Not had that timer/module fault for at least 5 years, but never had a tacho fault on a bosch motor for your info.

    Greg

    in reply to: Diplomat ADP8242 power button does not function #148543
    gegsy
    Participant

    Re: Diplomat ADP8242 power button does not function

    Control board for sure

    Greg

    in reply to: Soap Powders & Technology Training #104348
    gegsy
    Participant

    Re: Soap Powders & Technology Training

    No problems Ken, credit where its due. A lot of time and effort went into this module.
    After what you endured re- physically being with the machines that were testing the “secret” detergent, you deserve an endurance certificate 😀

    Del did mention DVD and has offered so will prob get to watch it tomorrow hopefully.

    On that note I cannot stress yet again, the importance of this training session.

    Thanks again

    Greg :tup:

    in reply to: Soap Powders & Technology Training #104346
    gegsy
    Participant

    Re: Soap Powders & Technology Training

    We’ve had our traing on this today. Rob was excellent.
    I would urge anyone to take advantage of this invaluable training as it puts to rest some myths about powders and liquids and how they work differently with different clothing.

    Thanks again Rob

    Greg :tup:

    in reply to: Bosch KGE33101GB fridge freezer #149311
    gegsy
    Participant

    Re: Bosch KGE33101GB fridge freezer

    Im guessing model is a KGE3301gb/??
    Is it flashing in frg section or frz section Bryan?

    Greg 🙂

    in reply to: bosch wfr2866gb/01 error 17 ? #149297
    gegsy
    Participant

    Re: bosch wfr2866gb/01 error 17 ?

    Hi Smartin
    Error 17 – Pressure sensor – check cable/replace sensor

    Greg 😉

    in reply to: Can Hotpoint get any worse #149094
    gegsy
    Participant

    Re: Can Hotpoint get any worse

    Talking of brand names selling. Bosch using Crosslee for some of their dryers.
    Nothing wrong with white knight i have had one for 10 years but it aint no Bosch.

    in reply to: Does P45 know about this. #149147
    gegsy
    Participant

    Re: Does P45 know about this.

    Im a dab hand at shearing 😆

    in reply to: Does P45 know about this. #149145
    gegsy
    Participant

    Re: Does P45 know about this.

    too much hair for me Chris ewe know 😆

    in reply to: Does P45 know about this. #149143
    gegsy
    Participant

    Re: Does P45 know about this.

    Fish jokes ?? stop carping on 😆

Viewing 15 posts - 6,391 through 6,405 (of 6,724 total)