[gegsy]

Re: Pingu

Little Britain sayings 😆

[gegsy]

Re: Pingu

Penguin45 wrote:Who let him in? I’m the only Penguin in this village….. 😆 😆

Chris.

He’s not a penguin, just a bit flightless, Myfanwy 😆

Greg

PS – For Gods sake Chris, you could have got a a bit of flipper fun there you bl**dy idiot :rotl:

[gegsy]

Re: Bosch T/Dryer light bulb ?

Hi
Usually from top, but you could give Merloni a ring considering post of April 1st iadom 😆

Greg

[gegsy]

Re: Leaky Fridge

A Hotpoint Ice(BERG) Diamond.

😆

[gegsy]

Re: siemens waterhammer

Hi
Good advice “guest”. How about registering if you an engineer in the trade (see kwatt)
Too elaborate on fault, remove front plinth part of d/w. You will then see a 1ft transclucent ribbed pipe going from metering unit on l/h side to sump.This pipe is ‘O’ ringed either end and will pull off to enable cleaning.

Reasssemble an fault should disappear.

As always remember DISCONNECT appliance before attempting any repair :plug:

Greg

[gegsy]

Re: Bosch SMS6032 – Running problem

Hi
Glad to be of assistance, for your info I have found exchanging the hose is a far better repair as it tends to gunge up quicker due to remnants.
Hose is only approx £5 if you want p/no and correct price let me know.

Greg

[gegsy]

Re: Bosch Maxxit wfr2460 No Display….Any Clues??????

Hi
possibly a mains surge or glitch in the supply, may have defaulted module to factory settings. will need re-coding.

Greg

[gegsy]

Re: Indesit Dishwashers and their Problems

About sums them up really doesn it 🙄

[gegsy]

Re: no water to to top basket

Hi
Some have a diverter unit which could be stuck caussing your fault but as
kwatt said, without a model number is difficult to help

Greg

[gegsy]

Re: Bosch SMS6032 – Running problem

Hi
Almost certainly a blocked metering hose running from l/h tank to sump base. Can also be a sensitive aquastop unit but not as often as the gunged metering hose.

Greg

[gegsy]

Re: Knocking Bosch

Hya Martin,
I agree with Ken, but Ive never seen it with an Exxcel/Maxx.
I have had similar sounds with the LG, was lateral play in the bearing, sorry can’t be any more help.

Regards
Greg

[gegsy]

Re: Bosch 6312 Dishwasher: No Heat

BSH-MAN wrote:The board hole for the pin is too big.

That makes sense, silly mistake though 😳

[gegsy]

Re: NEFF

Hi
Do we have an Enr/Fnr number??

Greg

[gegsy]

Re: Merloni to take control of Siemens-Bosch

lotusray wrote:u got me also but u never know it might just be in the pipe line 😯

I hope not, they can’t cope with their own workload 😯

[gegsy]

Re: Merloni to take control of Siemens-Bosch

PHEW!! What a relief, you will pay for that iadom 😆

Greg

[Author]

Posts