Forum Replies Created
-
Posts
-
Re: Whirlpool G2P90F (854184615020)
I will go and have another look at the cooker to see if there is any visable board damage.
Goose
Re: Belling IDW603 Dishwasher
Didn’t look for a manufacturers number when I there. The part thay have sent is a standard WM type element but the girl assured me it fits in to the heater box still not sure though! Let you know next week when I go back
Goose
Re: Belling IDW603 Dishwasher
Quite impressed with the service ordered yesterday arrived this morning.
Goose
Re: Belling IDW603 Dishwasher
So whats the tie up with Brandt, De Deitrich, Belling Stoves New world Etc. Could thay be an alternative to Connections?
Goose
Re: Belling IDW603 Dishwasher
This is very strange. I called to order the part and mistakenly dialed the number for Brandt, The funny thing was they identified
the correct part, claimed thay have it in stock and the young lady on the phone could even confirm that the element is supplied seperatly from the heater box They are called A To Z Spares. Any one heard of them?Goose
Re: Belling IDW603 Dishwasher
Its a Servis clone judging by the lower panel and spray arm setup. The PT No Stoves gave me was: 082619107 which dosn’t show up any where. I am a bit worried that this is going to turn out to be the right part as it seems a bit under priced for Stoves. Would any one know if its suppied as a unit or you have to fit a new element in the box
Goose
Re: Belling IDW603 Dishwasher
Called Stoves, Not to bad £40 inc Vat and p&P and in stock.
Looks a bit of a pig to fit though.Goose
Re: Tax Question
As far as I know advertising is one of thr few things you can claim 100 per cent for, As the IR can’t claim back any amount for personal use
Goose
Re: Help Please!
It looks like I was very luckey that the new board did’nt blow again as this was the Bosch motor.
Goose
Re: ENERGY REGULATER
Got 2 charts if you want them they dont show Strix regs but I think terminal markings are the same as the late Diamond H.
Goose
Re: Belling format 6060
I still fit a lot of these tubes you should be able to get one at your local electrical wholesaler for about £2.50 just ask for a 21in fluorescent
with a starter to matchGoose
Re: Help Please!
Guess what job I have just been back too
She did one wash and then the brushes failed 😳
Could worn brushes have damaged the pcb rather than the loom?Last time I do a job for a neighbour
One embarrassed Goose
