[goosegreen]

Re: Belling 315 BH (Creda Made)

Thanks for that lads
Will order the relay and hope for the best and try to break even on the job as I am sure I will never use the stat

Goose

[goosegreen]

Re: Creda 48149V 41100084 built in oven

Is it a single or duel grill

Goose

[goosegreen]

Re: Belling 315 BH (Creda Made)

Thanks for that Dave, You wouldn’t have a part number would you. Tried to cross reference against loads of Creada/Hotpoint models but couldn’t find it.

Goose

[goosegreen]

Re: How much do you think a Hoover 3236 washer cost in 70’s?

Martin
Was that the Indesit with the soap dispensor under a flap on the top left hand side? I worked for Rumbelows for a fer weeks and delivered loads of them seem to remember the price at £59.

Goose

[goosegreen]

Re: BUILDING REGS PART F

I Hope the cracking up bits right as I replace loads of cooker hoods for letting agents and have found them a good little earner. Sounds like Part P all over again

Goose

[goosegreen]

Re: Electruepart

I have found that Electrue’s price structure can be very strange. I just ordered two sets of HP Bosch (1604462) brushes. Failed to check the price multiples and was charged £12.10 each. If I had ordered at the X4 price they would have been £6.31. Almost 4 for the price of 2. Would they not be able to flag this up when you are building you order? I am looking forward to Maddocks Europart getting there new site up and running as they are promising up to date pricing and live availability and I have always found there prices to be very competitive. Masterparts non gen prices are very good but I find most gen stuff not much difference from Connect and the stock holding much lower. If there is an alternative out there please let me know

Goose

[goosegreen]

Re: Whirlpool 854254015810

Cheers dave.

Goose

[goosegreen]

Re: wiring solid hotplates to energy reg

This post just reminded me that I always wondered why solid hotplates were almost always fed from 6 position switches rather that energy regs
Was there a reason for this?

Goose

[goosegreen]

Re: Fagor LVU661IT Int Dishwasher

r600a

PM just sent

Goose

[goosegreen]

Re: Whirlpool G2P90F (854184615020)

After last week I thought things could only get better and they did. Gave a couple of the relays on the power board a sharp tap and Job Done

Very happy customer as I had told her the repair could have been in the region of £140

[goosegreen]

Re: Leisure Classic 90 S/N 5883001062

Thanks for that Robbra. Beko seem to have become a big player in our game lately,What with ISE and all that, I have never had a problem with them,simple products, cheap and available spares. I will call SEME on monday and check the price.

Thanks Again

Goose

[goosegreen]

Re: HPT TL 52P T/D

Thanks for the quick replie Eastlmark Its just that I got a call back for Monday, Complaint of squeaking noise, Maybe a shot of WD40 will do the trick.

Cheers Goose

[goosegreen]

Re: DeDeitrich 7684

Finaly got round to this job yesterday fitted 2 small hinges and a small bag of bolts and bushes Cost of parts £87.35 I let the customer have a copy of the invoice to show her husband, because he would not have beleived that such small parts could cost so much. Also did a small job on her washer and charged her £150 and left her very happy
Thanks again for the parts list.

Goose

[goosegreen]

Re: Belling IDW603 Dishwasher

Thanks Dave that the one. Dont know how you found it though I searched connection for ages knowing it was a Servis clone but ccould not find it.

Cheers anyway
Goose

[goosegreen]

Re: Belling IDW603 Dishwasher

Got back to job today just as I thought it was It was the wrong part.

Here is a bad pic of the part I need
URL=http://img512.imageshack.us/my.php?image=heater2oc.jpg]

Will call A To Z tomorrow
Goose

[Author]

Posts