Forum Replies Created
-
AuthorPosts
-
goosegreen
ParticipantRe: Basket Case
Tried that Chris, but the later version(91171104801) has a rear feed for the spray arm but the early one is fed from the top of the tank I am now stuck with the later basket which I have got the hassle of trying to return to electrue Cheers anyway
Goose
goosegreen
ParticipantRe: Another Creda Cooker
Thanks Bryan
It has been one of those days 😕 😳Goose
goosegreen
ParticipantRe: Down to earth cooker elements
We used to have this problem when I worked for creda with there Gen Elements. We either wired them up at home ( In garage) without an earth and run them for 10 Mins or if you could ensure safety remove the earth fron the cooker and run all the elements till they dried out. Almost always worked.
Goose
goosegreen
ParticipantRe: It’s too dark to work!
Is this an Age Thing? I don,t remember having torch & light problems when I started in this game, Was a few years ago I might add. 😉 I was just wondering what the avarage age was of Posters to this Forum
I will start, The Big 50 In December This year
Goose
goosegreen
ParticipantRe: Masterpart vs Parts Center?
Just one thing to watch with Masterpart as I have had on 3 occasions lately stock availability stated Low or in stock but on delivery listed as back ordered. A quick e mail cancelled the back order though.
Goose
goosegreen
ParticipantRe: Blomberg 1501 AAA
Thanks Dave
Have ordered from MasterpartGoose
goosegreen
ParticipantRe: Zanussi, powder stains
Very strange!
Called out today to a valued customer with the same problem on a 3 year old Zan w/m. Did all the usual
checks. Draining , Jet system working amd not overfilling etc. He then showed me the detergent the Boss
uses, And it was ECOVER. Trying to be as diplomatic as possible, suggested that they try a
standard big box powder and let me know if the problem persists As I have sorted faults on the Neff
Cooker & Dishwasher plus the Zan condenser dryer it would be nice to be proved right on the w/m as well
Please keep posting on this one!
Goosegoosegreen
ParticipantRe: Sharp R874 (WM) Combi
cheers dave
I will check the fan when I go back.
Goose
goosegreen
ParticipantRe: WP Spray pump Motor
I asked this question because I was having a look at the labour rates poll and my charges seem to be at the lower end of the voting so £47 for a 30 min job 5 miles away seeemed reasonable to me. I am lucky as I have no competitors for miles who are willing to do dishwasher let alone the intergrated stuff and I seem to get a steady 8 to 10 jobs a day.
goosegreen
ParticipantRe: WP Spray pump Motor
Cust just called and accepted my Quote do you think my price was about right?
Part £68.00 Inc
Labour £47.00No vat involved
I dont know why, But with some jobs you know you have a good chance of having the quote accepted,
And with others you just know you are wasting your time!
Goosegoosegreen
ParticipantRe: Ignore List!
Disregard last post, One of the kids just walked in and changed my Avatar for me, It took all of 10 seconds, easy when you know how.
Goose
goosegreen
ParticipantRe: Ignore List!
Just mailed Chris re how to change the avatar as I havn’t a clue how to do it One of the kids did my existing one
Goose
goosegreen
ParticipantRe: Ignore List!
Cheers gegsy
(Mad) goose
goosegreen
ParticipantRe: Ignore List!
Seriously then who got rid of Goat boys Avatar?
( Mad ) Goose
goosegreen
ParticipantRe: Ignore List!
gegsy
What visitors were scared of goat boys Avatar. My kids (sorry Goat Boy) thought its was the best one they had ever seen (there Goths(). No sorry one of them has now become a Chav, Apparantly. Do we have 5 year olds on this site? And how can I get a Mad Goose one.( Mad) goose 😈
-
AuthorPosts
