hilly

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 287 total)
  • Author
    Posts
  • in reply to: Hoover dishwasher hose part no req #406461
    hilly
    Participant

    Re: Hoover dishwasher hose part no req

    Cheers don, that will help.
    Muchly appreciated

    in reply to: Hoover dishwasher hose part no req #406459
    hilly
    Participant

    Re: Hoover dishwasher hose part no req

    Sorry should have said it’s the motor to sump hose for a hoover hnd3212 d/w

    in reply to: bendix bwd134w not drying #403414
    hilly
    Participant

    Re: bendix bwd134w not drying

    Thanks all, I had cleaned the matrix but missed a partial blockage in the small hose going down to the pump :boops:
    Thanks again, Paul

    in reply to: bendix bwd134w not drying #403412
    hilly
    Participant

    Re: bendix bwd134w not drying

    Yes I can see the water running thru the condenser tank
    Cheers Dave

    in reply to: bush w/m a126q #398732
    hilly
    Participant

    Re: bush w/m a126q

    I’ll double check it, cheers bob

    in reply to: hotpoint wd640 module #396201
    hilly
    Participant

    Re: hotpoint wd640 module

    Allsorts wrote:Ring EMW and ask for the board configured for that model and that’s what you’ll receive

    Cheers, in the past they have always asked as these models could have either board fitted, just thought it was worth asking if there was another was of telling.

    in reply to: Whirlpool American t/d #392012
    hilly
    Participant

    Re: Whirlpool American t/d

    Cheers, I’ll have a look

    in reply to: Smeg Wdi12c drum #390029
    hilly
    Participant

    Re: Smeg Wdi12c drum

    Just a update for this, the drum spider was cracked, I was dreading doing this but not a bad machine to work on. Downside new door seal, spider and bearing seal was nearly £160 🙁

    in reply to: indesit idf125 drying and start/pause light flashing #366265
    hilly
    Participant

    Re: indesit idf125 drying and start/pause light flashing

    iadom wrote:Might be better to post on the Trade side, 😉

    Damn, doing it on my phone, didn’t realise I wasn’t on trade.
    Cheers

    in reply to: indesit idf125 drying and start/pause light flashing #366263
    hilly
    Participant

    Re: indesit idf125 drying and start/pause light flashing

    Did you resolve this problem? I’ve got the same lights, the wash pump is noisy but I’m just wondering if theres another problem as well with these lights showing.
    Thanks Paul

    in reply to: HPT BWD 129 washer dryer random lights flashing. #390030
    hilly
    Participant

    Re: HPT BWD 129 washer dryer random lights flashing.

    I’ve replaced a few display boards on these models, they can throw up some strange things

    in reply to: Smeg Wdi12c drum #390028
    hilly
    Participant

    Re: Smeg Wdi12c drum

    Cheers ill get serial no for ordering, this is the 2nd one of these I’ve seen with this fault the last one the customer didn’t go ahead with the repair, I’m thinking it may be a can of worms job ;-(

    in reply to: Bosch washer dryer won’t release child lock #389585
    hilly
    Participant

    Re: Bosch washer dryer won’t release child lock

    All sorted 😉 many thanks for all your advice, muchly appreciated

    in reply to: Bosch washer dryer won’t release child lock #389584
    hilly
    Participant

    Re: Bosch washer dryer won’t release child lock

    spanner51 wrote:This has been covered before
    trade-technical/bosch-not-starting-t74209.html

    Thanks for that, phone call to customer tomorrow to see if he can do it to save me a trip,
    I’ll let you know the outcome

    in reply to: Bosch washer dryer won’t release child lock #389580
    hilly
    Participant

    Re: Bosch washer dryer won’t release child lock

    Martin wrote:When you press and hold in the button for 5 secs does the key symbol switch off on the display?

    No it stays on all the time,

Viewing 15 posts - 31 through 45 (of 287 total)