[hilly]

Re: indesit iwsb61251 eco uk

Yeah, it’s in a uni property so no guarantee ;-(

[hilly]

Re: neff slide & hide door

Great thanks, looks like new hinges then

[hilly]

Re: bosch WTL6106GB/07

going back today to bang my head on this one,
wish me luck

[hilly]

Re: zanussi zwg1140m shutting down

thanks for the replies, quick update, no earth faults or dry joints so I quoted for a replacement pcb, and now the machine has gone to appliance heaven, r,i,p you Chinese piece of junk

[hilly]

Re: hoover dyn8146d-80 e08

ive tried another motor on it and still the same problem, there is the main pcb (top right)and a rectifier pcb(bottom right) any ideas if the rectifier one could cause this problem?

cheers paul

[hilly]

Re: neff slim d/w overfilling

Found a chafed wire next to the hinge, repaired it, job done 😉

[hilly]

Re: neff slim d/w overfilling

that’s the one I changed martin the one with the rubber plunger,
baffling me this one. bet its something daft im missing

[hilly]

Re: neff slim d/w overfilling

I managed to get the motor going a couple of times but only after I had drained all the system before starting
cheers paul

[hilly]

Re: neff slim d/w overfilling

cheers dave, the switch is operating ok, ive checked the wiring loom back to the timer and all is ok,

[hilly]

Re: Hotpoint’s not draining

cheers allan

[hilly]

Re: uninsulated female spade crimp terminals

I use the blue & red ones but im looking for the ones with no insulation on the crimp.
thanks

[hilly]

Re: Hotpoint’s not draining

did you sort yours allan?
ive got a indesit w/m and a hotpoint w/d with the same problem they will do the full spin but only drains for a few seconds.
the hotpoint I disconnected everything apart from interlock, pressure switch and pump and it still did the same, but no error code

cheers paul

[hilly]

Re: ZANUSSI ZDC46130S error

it is in a garage, it just continuously flashes red and beeps 3 times repeatedly.

[hilly]

Re: Hotpoint WDL540P interlock clicking

its worth a try cleaning and tightening the connections on the pcb,
it worked for me before.

paul

[hilly]

Re: Hoover vhc580nc-80 flashing lights

thanks for the replies martin, I changed the rear ntc and that seems to have sorted the problem, just had another one same model number with the filter light coming on, faulty pressure switch on that one.

many thanks paul

[Author]

Posts