hilly

Forum Replies Created

Viewing 15 posts - 271 through 285 (of 287 total)
1 2 3 … 18 19 20
  • Author
    Posts
  • December 19, 2005 at 9:04 am in reply to: hoover aaa140-01 w/m #158238
    hilly
    Participant

    Re: hoover aaa140-01 w/m

    ive done that it comes up prog cancelled then if i select a prog it shows the prog on screen then comes up with setting washing parameters pls wait and wont do anything? ❓


    paul

    December 10, 2005 at 10:51 pm in reply to: siemens se54230gb/07 d/w #156955
    hilly
    Participant

    Re: siemens se54230gb/07 d/w

    thanks for help

    paul

    December 9, 2005 at 7:26 pm in reply to: siemens se54230gb/07 d/w #156952
    hilly
    Participant

    Re: siemens se54230gb/07 d/w

    one of the lugs on the module case had broken so the third button wouldnt connect does anyone know if i can get the case on its own or do i have to buy the complete module?

    thanks paul

    December 9, 2005 at 9:14 am in reply to: hotpoint wma11 #156303
    hilly
    Participant

    Re: hotpoint wma11

    thanks for advice found out it was a motor fault


    thanks paul

    November 28, 2005 at 8:48 pm in reply to: indesit DI67 d/w #155912
    hilly
    Participant

    Re: indesit DI67 d/w

    thanks MARK1 will try new heater first


    paul

    November 28, 2005 at 8:45 pm in reply to: indesit DI67 d/w #155911
    hilly
    Participant

    Re: indesit DI67 d/w

    I thaught if the relay went there wouldnt be any juice at the element?

    paul

    November 16, 2005 at 11:30 pm in reply to: diplomat 12043 #154558
    hilly
    Participant

    Re: diplomat 12043

    ya thanks don’t know where i got that number from its adp8132

    paul 😳

    August 31, 2005 at 12:04 am in reply to: ariston Lsi 61 #145503
    hilly
    Participant

    Re: ariston Lsi 61

    element is ok & ive done a insulation test all ok?

    help!!!!!!


    please, paul

    August 2, 2005 at 11:17 pm in reply to: hotpoint df53p d/w #143955
    hilly
    Participant

    Re: hotpoint df53p d/w

    sorry should have mentioned i replaced the bottom arm about a week ago the old one kept falling off. i will double check it just incase

    thanks paul

    August 2, 2005 at 11:12 pm in reply to: ariston al1250ctuk w/d #143957
    hilly
    Participant

    Re: ariston al1250ctuk w/d

    it seems ok ? i will give it a go

    thanks paul

    August 2, 2005 at 10:30 pm in reply to: ind wd12uk #143827
    hilly
    Participant

    Re: ind wd12uk

    ive had this it was a bad connection on the stat check the heater as well

    paul

    June 9, 2005 at 9:35 pm in reply to: diplomat adp8322 #138021
    hilly
    Participant

    Re: diplomat adp8322

    thanks at least i can face the customer with a bit more confidence now

    cheers paul

    May 30, 2005 at 10:12 pm in reply to: bf51 sticking on programe? #136252
    hilly
    Participant

    Re: bf51 sticking on programe?

    tried it with no detergent still sticking
    i think this ones jinxed

    thanks paul

    May 28, 2005 at 2:14 pm in reply to: bf51 sticking on programe? #136250
    hilly
    Participant

    Re: bf51 sticking on programe?

    ive spoken to customer they have used the 3 in 1 tablets for about 18 months but they were still putting salt in up until a month ago

    think i might set fire to it soon


    any more ideas would be appreciated
    thanks paul

    May 27, 2005 at 11:26 pm in reply to: bf51 sticking on programe? #136249
    hilly
    Participant

    Re: bf51 sticking on programe?

    thanks i will ask customer about detergent. i only replaced toc after talking to another engineer apparently he had one that welded the contacts together inside. it hasnt tripped out so i replaced it just to try
    thanks 4 help.
    will let u know outcome
    paul

  • Author
    Posts
Viewing 15 posts - 271 through 285 (of 287 total)
1 2 3 … 18 19 20