[hilly]

Re: indesit wm12 x uk

cheers dave

[hilly]

Re: indesit wm12 x uk

cheers dave do u have the part number for drum replacement just incase

ta paul

[hilly]

Re: hotpoint condenser dryer ctdoop

cheers dave you was right it was the timer.
another one for the memory bank.

cheers paul

[hilly]

Re: hoover hse140 w/m

leavemetogetonwithit wrote:If it’s one of the models with a square computer board on the rhs top of cabinet the “slave” timer (selector switch with motor drive) is favourite. This has been mentioned in many previous threads. Seme has them around £13. Might be worth keeping one in stock.
Mike.

thanks for info will look into it

cheers paul

[hilly]

Re: hotpoint ctd00g dryer

thanks iadom & johnnyj i guess one of those kits will do the job
thanks again paul

[hilly]

Re: hotpoint condenser dryer ctdoop

it only reverses when it should be going forward it heats ok and i can hear the pump working but motor action then it reverses for about 20 to30 seconds then again no motor action but everything else is ok

thanks paul

[hilly]

Re: stoves dw617 dishwasher

thanks aqualectric need to sort circ motor price out first i think they will scrap it if i cant find it cheaper but at lest thats another road i can go down if req

thanks paul

[hilly]

Re: hotpoint wma44

thanks for email very useful although it didnt solve the problem this time
thanks for the help

paul

[hilly]

Re: merloni bearing kits

when i enquired with indesit with w123suk they said there is different thicknesses of shafts so i guess they must have modified it during production by the way they spoke all the merloni machines like this one are this way. With the serial number they can tell u exactly which one it will be i was just hoping i would be able to carry a set of each on stock so i can complete job in one visit. (i ordered a set of bearings and a seal about two weeks ago from merloni but they wouldnt give me too much info and im still waiting for them to arrive!)

paul

[hilly]

Re: neff w/d about 14 yrs old

thanks for replys i think that price may convince them to invest in a new one!

ta paul

[hilly]

Re: Brant d/w & washing up liquid

just had same problem customer put fairy on greasey oven tray to help remove grease in d/w 😯 yep it over sudded i rinsed it out a few times and reset stat all ok now(till next time)

paul

[hilly]

Re: sterling bf01x

thanks deltra

[hilly]

Re: belling IDW603

belling had sent old stock by mistake the strings and springs are ok
thanks for help

ta paul

[hilly]

Re: belling IDW603

i will have to ring belling 2moro see if they can shed any light thanks 4 reply

paul

[hilly]

Re: hotpoint wd640 TEST?

brilliant thanks

[Author]

Posts