Forum Replies Created
-
Posts
-
Re: Bosch WAE24164GB/30 no motor.
Sorted. 🙂
Took pcb out and it was fine, no signs of any damage whatsoever, cleaned and refitted and put the new motor back in.
I then placed a comfortable chair in front of the machine and for almost 20 minutes sat there trying to get it to reset. tried the routine quickly, slowly but no matter what I tried it would not clear.
Even my infinite patience was at breaking point and I eventually decided to call it quits and at that very instant when I turned the knob back to off it cleared. Can these machines read your mind. ❓
I have never yet failed to clear one but this was far and away the worst one I have had. :rolls:
Jim.
Re: Bosch WAE24164GB/30 no motor.
It is the first one I have been unable to reset but every single one of the others was just brush replacement, not blown toc.
I wonder if anyone has had any success repairing blown tracks?
Only one way to find out I suppose. 🙂
Re: Bosch WAE24164GB/30 no motor.
I have done this reset dozens of times, never had one clear at the first attempt, but usually always managed it in the end.
Just wanted to know if the lights will still flash if the board has been damaged to save me having to return, didn’t have enough time this morning to remove the pcb after the prolonged attempts to clear it. 🙁
I have also come across a totally different reset involving turning the knob just one turn to the left, but think that is for more recent machines.
Re: LG Direct Drive Washing machine making heck of a row
Tell her that in her attempt to save the planet she has been washing her clothes in such a way as to leave them riddled with bacteria even after washing. 🙁
Re: LG Direct Drive Washing machine making heck of a row
Worth noting that damage like that is usually as a direct result of constant low temperature washes often combined with liquid or gel sachet use. Especially bad in soft water areas.
Worth giving THIS article a good read. 😉Re: Door flashing on digital display !!
Could be motor carbon brushes, loose or broken motor wiring connections, burnt wiring to door lock or even main pcb failure.
Re: Hotpoint oven UY46K Main oven door hinges
Just in case you manage to find out the correct model, the part number for the UY46K is C00223945.
For the UY46K Mk2 and UY46K Mk2(T) it is C00196304.Jim.
