Forum Replies Created
-
Posts
-
Re: Indesit Washer-Dryer WDN 1079 WG – help with drying feat
Another thought, is one of those buttons for half/full load. These machines can wash a full load but only wash and dry a half load. If it has one try it with the half load button selected.
Re: Indesit Washer-Dryer WDN 1079 WG – help with drying feat
Sadly that picture is so small it’s impossible to make out any of the buttons. 🙁
I just have it in the back of my mind that one of those push buttons has to be selected but I could be mistaken.
Of to watch Man Utd shortly, hopefully if you can post a clearer, bigger pic then some else may be able to see it before I get back later.
Re: Indesit Washer-Dryer WDN 1079 WG – help with drying feat
Hmm, looking at the parts lists that looks like quite an old model, there isn’t even a manual for that on the Indesit web site, also lots of parts are obsolete for that machine.
Can you post up a clear picture of the control panel, we may be able to hazard a wild guess. 🙂
Not sure if the fast/slow spin button has to be in a certain position for dryer to work?????
Re: BRAINSTORM: CocaCola home appliance
A rather vague description ‘a home appliance’ unless this said appliance has to be directly concerned with Coca Cola products. ❓
Re: Cannon Camberley 10101G Lid Springs
Here you are, not sure how much help that is for re assembly though?
Re: At what point does one walk out on a job…..
Martin wrote:
…..and they sit on shiny ceramic tiles, the hoses neatly lying alongside. Just pop off the plinth, two screws at the top and s-l-i- d-e them out…!
Yes give me integrated any day 😉
Ha, if only..round here that applies less than 50{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time. 😥
Re: Hotpoint BWD129
?? That is not an error code, the error codes on this machine are ALL the horizontal lights flashing and a combination of the bottom five, right hand vertical lights on steady.
Is the machine draining normally now?
Re: Hotpoint WMFUG842 E15 error code
Supposed to be a heater relay fault, could be intermittent but the dryer ntc’s on these do throw up a few strange errors as well.
Re: One off opportunity.
Lawrence wrote:
What I want to know is what happens if you go to a machine that evidently has belt wear or something similar,do you do the mod and leave the rest ? in which case how can you sign it off as working to spec,or do you cover yourself by putting on the paperwork that the mod is untested ?
According to earlier information they are not supposed to touch existing faults but report them back and not do the mod.
Re: One off opportunity.
So many questions, are these all ‘new’ engineers, if so are they franchised or full company staff, have they all had new vehicles, tool kit, test equipment etc provided? Are they on short term contracts or long term with full employment rights?
Or are most of them current indies who are subbing?
Re: One off opportunity.
Only half of the problem, more likely to be pre existing faults not spotted, ignored or even new faults caused by the 350 ‘instant engineers’ they have found from somewhere. 😉
