Forum Replies Created
-
Posts
-
Re: http://www.thedomesticspecialist.co.uk
Never heard of them but took a look at their terms and conditions and see the company name of “salesfeed” if you go to the salesfeed website’s testimonial page at http://www.salesfeed.co.uk/testimonials.html
You will see someone we know there……
John
Re: Whirlpool ADP7955 Touch diagnostics
Hi Ray,
Send me a PM with your email address and I will forward the info you need.
John
Re: Whirlpool AWOD 5736 door seal
Hi Jim,
I took a look and cant find that model or 12nc anywhere
John
Re: Fisher and Paykel DD603H
If the top drawer is dead and the bottom is ok then it will be a faulty heater plate on the top drawer.
John
Re: Here’s something you don’t see every day
iadom wrote:It’s for the customers after they get your bill Johm. :rotfl:
I only charge a modest amount to my customers, just enough to keep the van going :rotfl:
John
Re: Whirlpool AMW510/IX Integrated multi function microwave
I have removed your email address from the post above and sent the info to you.
John
Re: Whirlpool AMW510/IX Integrated multi function microwave
whiskeyjack6058 wrote: any idea where the humidity sensor is? It’s a new microwave on me is this one. :-/
I haven’t got a clue…..the parts listing does not show a humidity sensor but does show a couple of themostats so it might be one of them, I would assume if it is there it will be visible inside the cavity somewhere.Send me a PM with your email and I will forward the info I have.
John
Re: Whirlpool AMW510/IX Integrated multi function microwave
Error 7 is a humidity sensor error.
John
Re: Steam shower enclosures
that’s the main concern I have, if I buy one will spares be available in the long term. Most places that sell them state that they come with a one year parts guarantee so if the steam generator goes after this will it end up being an expensive shower cabinet??
Some of the claims regarding the health benefits appear to be slightly exaggerated, with claims of helping circulation and asthma abounding. All scots men know that only Iron Bru can cure these ailments :rotfl:
Looks like a lot more research before I go ahead with this project.John
Re: Whirlpool AWM1001 Outer Door Frame
14 different versions of that machine, have you got the 12NC number??
John
Re: Fisher & Paykel DD603
Hi Nigel,
I assume you are getting a “U1” fault, if so it can be one of the following,
The water supply is not turned on
The machine is syphoning
The spray arm is not in place
Excessive foaming
The Inlet Valve has failed
The electronic controller has failed
Rotor not fitted correctlyThe fill level is decided by the resistance of the rotor motor which has a magnet embedded into it and a hall sensor below the main motor, firstly check that the rotor motor is turning freely and that the contacts on the hall sensor are not corroded as these are the two common faults.
John
