Forum Replies Created
-
AuthorPosts
-
johnmac11
ParticipantRe: Servicenet
kwatt wrote:
This site: http://www.appliancerepairinlondon.co.u … tions.htmlLooks an awful lot like the old GoLocal site and, it seems to be based in the same region or area where you got the call from but the company appears based in London according to other information.
K.
I just noticed the small print at the bottom of the homepage there says© Go local Repairs 2012
Looks like a reincarnation to me….
John
johnmac11
ParticipantRe: Whirlpool Oven.
The number you have is the serial number. Oven was made in 1996 so it will be a model starting with AKP or AKZ
Look on the CDSL website and you should be able to match hinges for it.
IIRC there are 3 different types of hinges for these ovens, one type is for full size doors that are double glazed, one for full sized door triple glazed and the last is for the small oven in a double oven unit.
John
johnmac11
ParticipantRe: Prima spares?
Front and back rail stops are different on this model, the front one is 481246279746.
John
johnmac11
ParticipantRe: Fisher Paykel Dishdrawer leaking.
You always get drips on the base when you remove the drawer just after a wash and there wont be enough water to set off the F1 alarm.
If it has had a leak in the past and the alarm goes off with no water in the base then it will probably be a faulty mains filter board.
I assume it is showing F1 on both drawers??
John
johnmac11
ParticipantRe: Hygena/Servis Dishwasher motor ABA9242
Part number is 651015829 and it looks like AWS have them in stock.
John
April 26, 2013 at 11:16 am in reply to: Rangemaster A/Style fridge freezer SXS creme 7911000089 #394212johnmac11
ParticipantRe: Rangemaster A/Style fridge freezer SXS creme 7911000089
control panel is 0064000823
power panel is 0064000595
Johnjohnmac11
ParticipantRe: Whirlpool American S20B RSB21 A/G 8586 151 15001
Send me a PM with your email address and I will forward some info.
John
johnmac11
ParticipantRe: The Man From Indesit
A chuckle…. I nearly choked reading that but look on the bright side, you get paid and extra £10 for gas work and £16 for regasses and only have to pay £7.5K for the stock.
Who would be stupid enough to take this up??
If this was posted in the trade forums I would expect it to become the new longest thread very quickly.
Johnjohnmac11
ParticipantRe: Beko
It seems as if you can’t give their fridges away………
http://www.bhf.org.uk/shop/donating-goo … -sell.aspx
John
johnmac11
ParticipantRe: F+ P BI602
Hi Lawrence,
Three different clocks for this model, two are digital and one is analogue, the latter is obsolete.
Post the PN number and I will get the part number for you.John
johnmac11
ParticipantRe: CDA Dryer Element
looks like it is 49574700
Johnjohnmac11
ParticipantRe: Beko AP930X
Hi Lawrence,
Check your PM’s
John
johnmac11
ParticipantRe: whirlpool akz 161 oven displays stop
IF there is no movement when pressed then it will be faulty.
John
johnmac11
ParticipantRe: whirlpool akz 161 oven displays stop
If the push button switch is fine then all it needs is the clock setting. Look at the posts below for instructions on how to do it.
John
johnmac11
ParticipantRe: Schott/Ikea/whirlpool Hob HOB611/S 854178315010
The new board needs to be configured, PM me your email address and I will send info on how to do it.
John
-
AuthorPosts
