Forum Replies Created
-
Posts
-
Re: Fisher&Paykel Oven
I prefer the old style ovens, the build quality was superb but they also had a price to match. The new ones are fine and all I ever change is fan elements and an occasional clock. Pricing for spares is reasonable with the fan element at about £14 and the clock less than £50 retail.
Nice oven for the price you have, cheapest retail I can see here is £750
JohnRe: Fisher&Paykel Oven
Fisher & Paykel ovens only come from two sources, the earlier ones with the blue enamel cavity were made in New Zealand or Australia, When F&P bought over Delonghi all production was moved to the Delonghi factory in Italy.
John
Re: Whirlpool oven AKZ151/IX
If the oven gets switched off at the mains it will display stop in the display, follow the instructions in the user manual for resetting the clock and it should be fine.
John
Re: Fisher and Paykel 88739 dish drawer
Send me a PM with your email address and I will send some info. What is the model number starting with DD or DS
John
Re: Whirlpool AWO/D4505 pump?
I will need to get an eye check, I looked through the thread twice and never noticed the number 😕
Part you need is 481221479983, CDSL want £120 trade for it…..
JohnRe: Whirlpool AWO/D4505 pump?
there are a few versions of this one Jim, have you got the 12nc number?
John
Re: whirlpool ceamic hob AKM613/BA
7 different versions of that hob and there is 3 different types of switch and hotplate.
12nc number needed to be sure of correct part.John
Re: whirlpool dw top arm feed pops off
Hi Mark,
Usual culprit is this http://shop.ukwhitegoods.co.uk/Dishwash … +Igni.html
If you look at the lugs that hold the pipe on you will find it is either missing the top part or it is cracked at the top causing the pipe to jump out during the wash.John
Re: MIELE T234C WOES…
Hi Seamy,
float switch seems to be working fine, if I empty the sump by putting power to the pump then run machine it will go through the program but wont activate the pump, the water bottle light then comes on ( once it fills the sump ) and I assume this is activated by the float switch.
With no power going to the pump during the functional test I assume it will be the pcb.
Does the moisture sensor test actually work, I have tried it on 2 machines and on both it fails the low and high resistance tests even though there is no problem the the carbons etc.
John
Re: Whirlpool 25Ri-DT PT
Here are the part numbers for both sides.
481246238153 Slide left
481246238154 Slide rightJohn
Re: Whirlpool 25Ri-DT PT
is this the part you want?
http://www.4whirlpool.co.uk/slide-1/pro … 1246238154
John
Re: Whirlpool 25Ri-DT PT
To make sure you get the correct part we need the 12nc number from the rating plate, number should start with 85****
John
Re: Whirlpool ADP9411
9 different version of this model so you need the 12nc number to be sure of right part, open the door and look on the top of the plinth, there is usually a few spare stickers on there with the 12nc and serial number on it.
By console module I take it you mean the module behind the fascia??
This one rarely goes faulty it is normally the one behind the plinth that goes.John
