Forum Replies Created
-
Posts
-
Re: Whirlpool AWD/R 4205 Check Water Check Filter Lights on
Hi Taff,
Send me a PM with your email address and I will send you some info.
Is the model number supposed to be AWOR4205?
let me know the 12nc to be sure I send the correct info.John
Re: Whirlpool side by side F/F display board
You are spot on Subs, only ice and water models before week 23 2003 needed both boards changed.
If you need a wiring diagram PM me your email address
John
Re: Whirlpool d/w adg7440 F4 error
F4 can be a faulty control board and assuming there is no blockage in the house plumbing or the waste pipe then that is all I can think of that you have left to try.
John
Re: TalkAppliance
TV is crap tonight so I took another look at the site and found the following.
WM posts = 596 all posted between 29/2 and 24/4
DW posts = 602 all posted between 29/2 and 27/4
FF posts = 335 all posted between 2/3 and 30/4
TD posts = 231 all posted between 4/3 and 21/4last post in the forum is on 30/3 so that is about 1800 posts between March and April and nothing since!!!!
I think he is copying ALL the posts from here and other forums as some of the posts are obviously from US customers.
John
Re: TalkAppliance
I just noticed that on the spares pages if you want to order a spare then they come from CDSL. It also says that if you don’t feel confident enough to fit then got to repaircare….
Could it be another CDSL site??
John
Re: Fisher & Paykal Dish Drawer Fault Code
The parts are the right ones. Being paranoid about CDSL was the box for the module opened when you got it??
Any easy way of checking if you have a faulty module is to swap the top and bottom modules to see if fault persists.
John
Re: Whirlpool AKZ456/1X 8585 4561 15010 Oven.
If the code doesn’t work then time for the scrap man.
John
Re: Fisher & Paykal Dish Drawer Fault Code
check the top harness where it connects to mains filter board.
What was the part numbers for the board and heater that you fitted?John
Re: Whirlpool AKZ456/1X 8585 4561 15010 Oven.
Doh… totally forgot that it could be done using the front buttons, I haven’t done one for about 3 years so I have an excuse.
The configuration code should be 07.
John
Re: Fisher & Paykal Dish Drawer Fault Code
Rinse light on is a F1 fault, water in the base of the machine.
John
