johnnyhoz

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 303 total)
1 2 3 … 19 20 21
  • Author
    Posts
  • September 17, 2014 at 7:32 pm in reply to: Bosch Induction Hob PIE645E01E/01 #419312
    johnnyhoz
    Participant

    Re: Bosch Induction Hob PIE645E01E/01

    Thanks lee8, found burnt section on faulty pcb, connected mains onto right two rings and they work great, contacted customer to give her the quotation to replace the left hand pcb but she wasn’t prepared to spend that much for the repair, thinking of putting the good parts on ebay.

    August 12, 2014 at 7:33 am in reply to: ZWF16070W1 #417794
    johnnyhoz
    Participant

    Re: ZWF16070W1

    Thanks canufixit, did visually check the tacho but looked ok, new motor then?
    Best Regards
    John

    June 23, 2014 at 8:28 pm in reply to: Indesit WIDXL126 Dryer error #415704
    johnnyhoz
    Participant

    Re: Indesit WIDXL126 Dryer error

    Cheers thanks iadom

    June 23, 2014 at 7:10 pm in reply to: Indesit WIDXL126 Dryer error #415702
    johnnyhoz
    Participant

    Re: Indesit WIDXL126 Dryer error

    Thanks iadom, Do you know where the ntc is situated as I guess both the ntc and the fan motor will have to be replaced?

    June 13, 2014 at 3:22 pm in reply to: SGS45C02GB/11 #415238
    johnnyhoz
    Participant

    Re: SGS45C02GB/11

    Ok thanks Martin

    June 2, 2014 at 5:20 pm in reply to: ZJD12191 Zanussi Washer Dryer #414740
    johnnyhoz
    Participant

    Re: ZJD12191 Zanussi Washer Dryer

    Thanks Martin I’ll check the wires

    July 5, 2013 at 5:30 pm in reply to: Bosch washer WAE24366GB/28 Dead #397285
    johnnyhoz
    Participant

    Re: Bosch washer WAE24366GB/28 Dead

    Thanks Martin, the customers already giping at the cost of the board and labour so probably won’t go head with the repair once I find out what caused the board falure.
    Trouble is in this area we have an argos end of line warehouse, they sell washing machines under £100, when people are pulling their belts in they don’t look long term,
    John

    October 17, 2012 at 12:38 pm in reply to: Zanussi ZWG7120P 0 error code + 3beeps #383013
    johnnyhoz
    Participant

    Re: Zanussi ZWG7120P 0 error code + 3beeps

    Hi Seamy
    be greatful for the service manuel
    my email is aaa.rep@ntlworld.com
    Thanks
    John

    October 16, 2012 at 7:17 pm in reply to: Zanussi ZWG7120P 0 error code + 3beeps #383011
    johnnyhoz
    Participant

    Re: Zanussi ZWG7120P 0 error code + 3beeps

    Thanks Seamy I wish the display was showing either of those codes but it is definatelty zerro or O and three beeps.
    Does anyone have the Service Manual for this model

    October 16, 2012 at 3:33 pm in reply to: Zanussi ZWG7120P 0 error code + 3beeps #383009
    johnnyhoz
    Participant

    Re: Zanussi ZWG7120P 0 error code + 3beeps

    There is no signs of water it’s an open bottomed washing machine,

    August 3, 2012 at 5:18 pm in reply to: Neff DW S5453 #329233
    johnnyhoz
    Participant

    Re: Neff DW S5453

    Thanks for the feed back NomadPaul, appreciate it

    John

    August 3, 2012 at 8:29 am in reply to: Neff DW S5453 #329230
    johnnyhoz
    Participant

    Re: Neff DW S5453

    Thanks Jem, where is the pressure chamber on this machine and is it easy to get to ?

    John

    August 3, 2012 at 7:53 am in reply to: Neff DW S5453 #329228
    johnnyhoz
    Participant

    Re: Neff DW S5453/1XGB/74

    Hi
    Have the fault on the above dishwasher that is filling/draining continuously at the start of the cycle and the tap fault light is on.
    Has anyone changed the impellor jug before? as need to price the labour accordingly, any advice I would be greatfull.

    John

    December 10, 2011 at 5:08 pm in reply to: WIDL126 Won’t stop spinning #365236
    johnnyhoz
    Participant

    Re: WIDL126 Won’t stop spinning

    Thought I checked the heater early in the diagnosis but I’ll check again
    Thanks Martin

    November 3, 2011 at 6:48 pm in reply to: Zanussi ZT 685 Dishwasher #362889
    johnnyhoz
    Participant

    Re: Zanussi ZT 685 Dishwasher

    Thanks Criscold

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 303 total)
1 2 3 … 19 20 21