johnnyj

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 1,251 total)
  • Author
    Posts
  • in reply to: ADP8352 Door lock problems #446566
    johnnyj
    Participant

    Re: ADP8352 Door lock problems

    It will be the long hinge bar twisting, used to get it loads of times on the Indesit dishwashers connect part no 5031680016468 JJ.

    in reply to: Qualtex v Connect #446541
    johnnyj
    Participant

    Re: Qualtex v Connect

    I ordered a couple of regulators a couple of weeks ago think I paid about £14 when I went back to fit I checked the price on line as I didn’t have the advice note they had went up £15 to £29 each within a week.

    in reply to: Repaircare asked me to work for them? #446213
    johnnyj
    Participant

    Re: Repaircare asked me to work for them?

    It was the way the payments for work done and the stock due, the way they paid did my nut in, all I wanted was a bill for stock and a payment for labour couldn’t be arsed with it at the end.

    in reply to: TDWSF83BEP Door Filter Light #445846
    johnnyj
    Participant

    Re: TDWSF83BEP Door Filter Light

    I have found out if you turn dial to 7 o’clock position and press the gentle button 3 times then press the start button this will let you into the diagnostics each press of the start button tests each component and at the end if one is faulty a fault code will be displayed.

    in reply to: Repaircare asked me to work for them? #446211
    johnnyj
    Participant

    Re: Repaircare asked me to work for them?

    Hope you’re vat registered or they don’t want to know, dumped me after I came of vat

    in reply to: Hotpoint HE7L252PUK Dots on clothes #446068
    johnnyj
    Participant

    Re: Hotpoint HE7L252PUK Dots on clothes

    i remember years ago cust complaining of rust marks on some clothes, i checked everything sump changed drum the lot still getting them, it turned out it was caused by the new hot water tank that had been installed and her still having a coal fire copper was coming in through the hot water feed and reacting with the dyes in these clothes i converted to cold fill problem solved.

    in reply to: beko QDW696 dishwasher #445785
    johnnyj
    Participant

    Re: beko QDW696 dishwasher

    Have you checked the start capacitor fitted one the other day 4uf

    in reply to: TDWSF83BEP Door Filter Light #445840
    johnnyj
    Participant

    Re: TDWSF83BEP Door Filter Light

    Dont know much about them but what i can gather there is a reed switch at the condenser when the lower filter light comes it wont start until you remove and clean the condensor, i would assume there might be a reed switch also for the door filter, if there is a reed switch it might not be registering that the filter has been removed and cleaned. I also believe that they will not work if they are outside in a garage or similar they need to be in a normal household enviroment or they dont work.

    in reply to: Whirlpool to do a recall on Hotpoint dryers #431619
    johnnyj
    Participant

    Re: Whirlpool to do a recall on Hotpoint dryers

    Spoke to an engineer today who does repaircare he got 10 jobs last week from them and has been unable to get any of them in, yesterday he was given another 60 looks like his phone will be redhot

    in reply to: Zanussi ZDC68560W 91609680204 T/D #445076
    johnnyj
    Participant

    Re: Zanussi ZDC68560W 91609680204 T/D

    Thanks Martin this will help greatly.

    in reply to: Hotpoint dishwasher LTF11M132C Changes progs #445102
    johnnyj
    Participant

    Re: Hotpoint dishwasher LTF11M132C Changes progs

    I have had display module cause this.

    in reply to: Are you busy? #444746
    johnnyj
    Participant

    Re: Are you busy?

    Done okay in Jan about same as last year, first 3 days of Feb mental dont miss indesit one bit.

    in reply to: WDPG9640PUK F13 error #444795
    johnnyj
    Participant

    Re: WDPG9640PUK F13 error

    Blocked condenser or filter?

    in reply to: Indesit Washer Dryers with no condenser valve! #444773
    johnnyj
    Participant

    Re: Indesit Washer Dryers with no condenser valve!

    There was a change in the condenser, pressure switch etc, on later ones and this machine falls into that category but what I can gather there still should be a triple valve with a condenser hose to the condenser, I will check with a couple of my old workmates tomorrow.

    in reply to: hotpoint h20 fault code #444596
    johnnyj
    Participant

    Re: hotpoint h20 fault code

    WT960 will be the PCB i would guess PCB with the other one as well as a minute is to short to time out during fill.

Viewing 15 posts - 31 through 45 (of 1,251 total)