[keithos]

Just change the cable problem solved

[keithos]

Agree with Dave definitely an earth fault on element

[keithos]

Best way to get the belt over the pulley is not to slack it off or remove one of the bolts. Just get any washing machine belt, put it around back of dryer belt and pull it over pulley. Easy job done, and no chance of braking pulley.

[keithos]

Thanks Dave will give it a go

[keithos]

I’ve found that this problem is a chip on the pcb. Goes for a few minutes and then shuts down. I got the chip on eBay only a few pounds

[keithos]

Re: WDL520 starts and stops

It’s the pressure switch

[keithos]

Re: Bosch condenser dryer WTE86304GB

Any idea which is the heater relay I’m thinking the large one. do you know of a supplier?

Thanks keithos

[keithos]

Re: Bosch condenser dryer WTE86304GB

Thanks Martin will check it out

[keithos]

Re: AEG LAVAMAT 6955

Thankyou electrofix will give it a go.

[keithos]

Re: Dyson Ball DC25 Animal

Thanks again Don thats switched on as well

[keithos]

Re: Dyson Ball DC25 Animal

Thanks Don no red button to reset & brush runs when connected to supply so fault not in brush head

[keithos]

Re: Bissell 9400E Carpet cleaner

Thanks Don

[keithos]

Re: Error code Zanussi

Many thanks Penguin 45

[keithos]

Re: Zanussi E33 fault

Thanks for those tips. Changed both switches seems fine.
keithos

[keithos]

Re: Bosch WOL 2200 Top Loader

Thankyou I’ll check the brushes.

[Author]

Posts