[kevinlewis]

Re: meile T234c

The heater stat open circuiting would still allow the motor to turn. the time dry is more for checking the brush sensors. This machine wont do anything.Yes, i should have checked the door switch but i somehow convinced myself that it must be the pcb.
thankyou for replying.

[kevinlewis]

Re: neff oven spare not available

i did advise them or a repair or supply him a new machine but he seemed a bit cheesed off so did not persue the subject.

[kevinlewis]

Re: BEKO FRIDGEFREEZER A190W

thanks for that. I know that on the maytag/ amana there is a klixon which only turns the fan on when the evap reaches -20. This beko didn’t have one so i guessed about the door being shut. Thanks again.

[kevinlewis]

Re: BEKO FRIDGEFREEZER A190W

or with an open circuited motor.
i found Beko’s phone number and after a long wait they were very helpful.They offered me a 10{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} discount. parts ordered.

[kevinlewis]

Re: neff oven spare not available

kevinlewis wrote:its a U1661N1GB/09. I will look for the display availability next time i’m on there. thanks for the tip.

I dont think that I can change /edit the incorrect model number from the first post. It seem that you can only edit post that are only a few hours old.
this issue of discontinuing the supplying of spares, especially on supposedly quality brands, needs addressing.
Maybe a call to Which or friends of the Earth?

[kevinlewis]

Re: neff oven spare not available

r600a wrote:Hi Kevin

Why not have the PCB repaired ?

It’ll be cheaper than a new PCB.

Bryan
yes, i would have tried to repair it but customer was adamant that they were going to buy a new machine.

[kevinlewis]

Re: neff oven spare not available

its a U1661N1GB/09. I will look for the display availability next time i’m on there. thanks for the tip.

[kevinlewis]

Re: neff oven spare not available

Yes, i know it comes up as being available but when you try ordering it it tells you that its no longer available.

[kevinlewis]

Re: Removing motor in Bosch SGS66A02GB/13

I’m having the same problem. What a rotten job this is. Such a bad design! There must be a link on here somewhere explaining how to remove the motor and heater. But where?

[kevinlewis]

Re: trouble understanding the advanced search

Thank you for all of that. i’ll give it a try next time i’m searching.

[kevinlewis]

Re: NEFF MULTIFUNCTION OVEN COMBI B6784N0GB/01 FD8709

Thanks for that info.

[kevinlewis]

Re: NEFF MULTIFUNCTION OVEN COMBI B6784N0GB/01 FD8709

DrDill wrote:Normally inverter board fault

Sent from my iPhone
http://www.kitchenkitsw.com
I’ve looked at the bsh website. it does not look like the regular Panasonic type inverter that Neff, Bosch and Siemens use.as I cant see a HV transformer it must be the inverter type. is the inverter part no; 642781, as its called the relay module on their website.Do you know what the magnetron’s 2M number is? thanks

[kevinlewis]

Re: BEKO dishwasher

Thanks for your advice.I did not have time to strip the facia to check the pcb for loose connections or burn marks ect.
would a fault on the float micro switch cause it to not pump out during normal operation? i did not see any signs of leakage on the bottom tray.
can you give me the part number or price of new control pcb or the suppliers. Thanks.

[kevinlewis]

Re: neff oven grill element

Thankyou for that. One happy customer . very good service from element man. next day delivery. Thankyou again.

[kevinlewis]

Re: AMANA WATER FILTER

Could not find it on the Sears site.The 7003 looks too narrow at the top.The original has “Penta pure Amana clean and clear”, printed on it.Again Maytag have told us it is now part no 67003662 sub from RO 185014

[Author]

Posts