Forum Replies Created
-
Posts
-
Re: teknic oven spares
thanks. it will have to wait until next week before i can return to the job. in the meantime i will keep on searchin’
Re: Bosch WAQ283S0GB/01 Fault E67
Just to confirm, as i can’t find a way of editing my previous posts,its a Bosch WAQ283S0GB/01. i had misheard and put an F in there. sorry.
Re: Bosch WAQ283F0GB/01 Fault E67
does anyone know how to access the Error codes for this machine?Are they on this site because I can’t find them.
Re: miele wt945s
does anyone have the sequence code for getting into the programme mode or service mode for this model?
Its now working after i removed the bottom pcb and reassembled having found no dry joints ect. Suspect a bad connection around the board. Keep fingers crossed.Re: miele wt945s
“If you were to select, “pump out”,the drum agitates both ways, it then beeps three times and the Anti Crease/ finish light comes on.”
This is not a problem. The machine is telling the user that it is now empty and that you can open the door.
The trouble is that if there is any water in the drum it does not pump it out and goes into fault mode after about 90 seconds.Re: flavel finess 100
Thanks for the information. i’ve double checked the serial number. the full number is 06101119 10 .I’m going back on Monday to fit the heat cut out and try to ascertain why the grill is not working. hopefully its the door switch as removing the front facia to get to the fixing screws of the selector switch look like an awful job.
Re: flavel finess 100
The rating plate is hard to read but this is all i can see 06101119. its about 8 year old. Flavel finesse 100 is on the front.
Re: Inverter Magnetrons
how did the fitting of the Mag go? Is it still working okay? I have the same situation with the 2M261 M32 from a 900watt machine, going to earth and the 2M236M42 on stock.I tried it for ten min. it heated okay.
Re: ariston advantage 2000
the machine was 10 years old.customer has decided to buy a new machine.Thanks anyway for your advice.
Re: ariston advantage 2000
No. when i was checking the door interlock it suddenly stated filling for a few seconds.I tried shorting out the contacts between com and live but it was still dead.
Re: Hoover hnmf2605a 80 thermister
are these instructions posted on this site? i can’t find them.
Where exactly do you need to cut into the insulation to access the NCT? hopefully it can be got at from the back of the appliance, behind the condenser.
