Forum Replies Created
-
Posts
-
Factory order part for sure, no use to date in the UK so I’ve requested a price on it but at least 3-8 weeks to get one.
K.
You’ll only get those with a new facia and that probably won’t be cheap but to find out I’d need the product code starting 51 from the rating plate of the cooker.
K.
This has been asked before and I think the fixing and terminal/connectors are different on each of them.
K.
Larger wash loads demanded by customers means that some compromises have to be made, this is one such.
K.
if it’s 2014 then you will need the later and, more expensive one. The same hinge is used on each side.
K.
There are two types used on that cooker, I’d need the full serial number etc to tell from that if required but, prior to production from 06-2013 is it is this one used:
https://shop.ukwhitegoods.co.uk/bz405103-bertazzoni-oven-door-hinge
After that date it then becomes this one used:
https://shop.ukwhitegoods.co.uk/bz405102-bertazzoni-oven-door-hinge-17025
K.
That model is a Currys Essentials machine made by Vestel and it will be completely different to an old PABL one.
K.
Nope, that all you get, they’re only intended to identify part positions, then cross-reference to get part numbers.
11˚C though is at the very low end that a heat pump dryer will work, they do not like low (10˚C or less) or high (over about 30-33˚C) temperatures and very often will not work beyond those.
K.
In test mode, for the relevant part being tested, it shows you the thermistor reading in the small box above where that code is.
Blowouts attached, good luck as I hate those ones.
K.
That’s like asking the car manufacturers to publish all their service information and I am sure you know the chances of that happening are less than zero.
Your choices are, pay them to do it all for you or, work it out for yourself and take on all the risks of that in virtually all cases.
OhEy means that the thermistor value has reached 55˚C and the compressor is stopped, somehow you’ve managed to get it onto a test cycle by the sounds of it. Above that, the temp value is shown.
On/Off (Power cycle it) to get it out of test mode.
K.
