Forum Replies Created
-
Posts
-
Hi,
I’d need the model number at least or a picture of the plate inside the hood is better to be able to tell you what motor it was, there are many.
K.
To you nothing.
To them, they wouldn’t have a clue unless they looked and unless there’s some imperative to do so, they won’t.
K.
They won’t differentiate.
If that type of product is usually hard wired, that’s how they’ll price it and treat them all the same way. They won’t break it down by models individually. It’s too complex and too confusing for customers as well as staff probably and will lead to accusations worse as why does it cost £40 to install one model from HP and £90 for another, then they get accused of ripping off another way.
No win situation so, go with the worst case.
K.
No, you’re not losing the plot. 🙂
It’s been tweaked to make it look a little nicer and a few changes to make it easier.
K.
Given the history on this one, my advice would be to give up on it and, it’s not worth spending the money you’d need for a board in any event.
K.
Yup, Dave is right, check that as they changed it as well from a plastic to metal pin to help durability.
Also if that happens when the oven is selected it’s extremely unlikely to be the board/s as they should only come into play when the hob is energised, not either oven.
So clock, outside chance, door switch a fair bet, energy regs for the oven and switch also possibles.
K.
Dunno. There is another search engine that can be used but if it’s any better, who knows but I’d doubt is a lot.
Of course the problem being, its got to remain “internal” to the site if you see what I mean.
K.
If you are replacing the old Diamond H type then you will find that
Diamond H Regulator Conversion Chart
K.
