Forum Replies Created
-
Posts
-
Re: Thermostat and fridge probs
They must have dropped it off the GIAS tech portal then Don it’s so old. 😉
K.
Re: Thermostat and fridge probs
That model number you have there isn’t being recognised anywhere, can you check it?
K.
Re: Bosch KGH39A47GB/01 fridge freezer frost issue.
In this section of the site…
http://www.ukwhitegoods.co.uk/help/fix- … -self-help
You’ll find this article…
http://www.ukwhitegoods.co.uk/help/fix- … hermistors
All about them.
K.
Re: Bosch KGH39A47GB/01 fridge freezer frost issue.
Sounds like you’ve got a sensor issue and it’s over-freezing if the fan’s running okay.
The two used in that model, I’m not bothering with the thermal fuse one are:
https://shop.ukwhitegoods.co.uk/00616301-ptc-sensor
https://shop.ukwhitegoods.co.uk/168766- … thermistor
The first is the freezer one, second the fridge. The freezer one is on the left side of the freezer evaporator.
Fridge one, right side wall behind the cover.
K.
Re: Whirlpool eleven flash error
On that model the 11 flashes or FA, where there’s no OWI as they call it used is indicative of a problem with the flow meter which is built into this fill chamber on the left side:
https://shop.ukwhitegoods.co.uk/4812418 … ll-chamber
K.
Re: Whirlpool eleven flash error
HI Keith,
It can be, both but I’d need the service number that starts 85 from the rating plate on the dishwasher to tell you much more about it.
K.
Re: Fresh Paint
He was looking at it and he thinks it’s an old URL that’s not flicking to the SEO friendly URL as it should… or something like that.
K.
Re: Whirlpool eleven flash error
I think it’s this set:
http://www.ukwhitegoods.co.uk/help/faul … ault-codes
K.
Re: Water Inlet Valve Location – Brandt VI600BE1
Follow the inlet hose, it’s on the end of that as the inlet hose screws onto it on almost all of them.
K.
Re: Fresh Paint
It’s that time again when the site needs a refresh.
In a few weeks I hope to be moving the site to a new version of PHP, the bit that runs it all in a way.
When that happens we have eyes on upgrading the main content side, store and forums which hopefully won’t be as traumatic as the last time.
I will keep you posted.
But once more I am toying with the idea of moving the forum from phpBB to vBulletin but, we’ll see.
K.
