Forum Replies Created
-
AuthorPosts
-
kwatt
KeymasterRe: Grey marks on washing
You can find all the reasons why here…
http://www.ukwhitegoods.co.uk/help/stai … ine-stains
K.
kwatt
KeymasterRe: Beko DW603
Like I said, you need to figure it out. Instructions are not included.
K.
kwatt
KeymasterRe: Beko DW603
From this, just like us, you’ll need to work it out…
K.
kwatt
KeymasterRe: Hotpoint FFA40X – Lights on no-one at home!
It’s basically just an electric pump in an enclosed case so, if it jams the answer to that is yes and it’s not always an electrical problem as it’s an electro-mechanical device.
Trouble being of course, you can’t inspect it beyond the outer casing to see what the problem might be.
All the PTC/relay does is fire it up to run and serve as a protection device, that’s about it really.
K.
kwatt
KeymasterRe: Beko DW603
There is a safety stat built into the heater itself or should be, then another thermistor or thermostat depending on the setup to control operating temperature.
K.
kwatt
KeymasterRe: Beko DW603
Yes, if memory serves that safety stat is a one shot one so, if it goes, new element.
K.
kwatt
KeymasterRe: Beko DW603
I have no clue how you’re measuring that but, using live mains is a very bad and dangerous practice that we cannot condone on here or someone will end up killing themselves!
There’s no call to do it with mains power at all.
Explained here: http://www.wikihow.com/Test-a-Heating-Element
But that open of the stat on it open and, it’s in technical terminology, knackered.
K.
kwatt
KeymasterRe: Hotpoint WM. Conditioner not taken
No odds, the hot will probably only open on the first fill after pre wash on a hot cycle. Won’t affect that.
K.
kwatt
KeymasterRe: White Knight C44AW noisy
A blowout diagram is often all you get.
Yes though, pretty much it’ll need to come apart.
K.
kwatt
KeymasterRe: Hotpoint WM. Conditioner not taken
Because it’ll just get the most pressure on the valve the opens first, the other will play second fiddle if there’s not enough pressure to give the force required.
K.
kwatt
KeymasterRe: Logik LVD7W15 Tumble Dryers – Recall
Yeah, well maybe it won’t just be Logik, see commentary here…
http://www.ukwhitegoods.co.uk/appliance … s-recalled
K.
kwatt
KeymasterRe: ISE 10 – 1606W
Check the thermistor for dirt, shorting etc before anything else.
K.
April 28, 2017 at 1:36 pm in reply to: Looking for a washing machines WITHOUT a sealed drums #447233kwatt
KeymasterRe: Looking for a washing machines WITHOUT a sealed drums
Don’t think LG are sealed.
Samsung maybe but, wouldn’t buy one or recommend them.
Miele, although there are rumours swirling that they too are doing the sealed tub thing now or, soon.
Vestel made machines, many can be split that I’ve seen, so far.
Apart from that, you’ll probably struggle.
K.
kwatt
KeymasterRe: LG Washing Machine is dead
What model is it?
K.
kwatt
KeymasterRe: Whirlpool S20E RBB2V-A/G Control Panel
Shown as item 526 2 on the attachment, maybe top on that one which is unusual.
K.
-
AuthorPosts
