Forum Replies Created
-
Posts
-
Re: Bosch WAB24161GB/01. E16 Fault
Thanks for your reply Steve ,Ive already replaced the interlock and checked for any other faults like wiring,Heater,etc. but cant find anyway of getting rid of this e16 message on the digital display.
Re: Regas fridges yes or no
Can anyone tell me training course you have to go on for regassing and how much does it cost and where do they do it .Ta.
Re: Regas fridges yes or no
I was led to believe that the new gas was flammable and so brazing was not an option ,Also is regassing domestic appliances financially worth it these days.
Re: Candy CDI 22E10-80 Dishwasher
If it’s not the element , wiring or stat there’s only the PCB left as far as I can see, is there really a kind candy man out there who’ll programme a board.
Re: Miele dishwasher
This may help ive had this problem before and i had to clean out the pressure switch it was really blocked up inside the other reason this has happened could be the reed switch not measuring in enough water just as a test pour in about an extra 1litre or so of water and see if this fixes it, hope this helps.
Re: Bosch f/f mod FD7608
Thanks for your reply Martin , Would you know what that fault code means thanks Larry
Re: Whirlpool Dishwasher ADG7560/2 just keeps pumping out.
Hi I’ve just read your post I’ve been to a wpl adp504 d/w today that just pumps out then then after a couple of minutes starts pumping intermitantly can’t find any fault I thought it may be the pcb.
Re: Hotpoint F/F FFP 187 BP Fridge compartment warm
Thanks for the reply , There’s no diverter solenoid that I could find anywhere and I don’t think it’s lost gas because the freezer is down to _18 at least .
Re: SEPTEMBER 2014 MEETING
What time does the meeting start and have you got the address of the hotel Thanks Larry.
Re: SEPTEMBER 2014 MEETING
Just wondered what the sept 19th meeting is about and is it open to all engineers thanks Larry.
Re: Bosch WAS24466GB/04
yes i am looking for a secondhand one should have made that clear on my post
