lerch

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 353 total)
  • Author
    Posts
  • in reply to: Unanswered posts #460202
    lerch
    Participant

    What individual parts have you metered up to now?

    in reply to: Service 2000 Bust? #452341
    lerch
    Participant

    Re: Service 2000 Bust?

    As above, also heard they were re-opening with some of the old staff under a different name just unsure what name.

    lerch
    Participant

    Re: Bosch Classixx 6 1400 – Not spinning (F:21 error & 1min)

    Stuck on 1 minute is normally the heater

    in reply to: John Lewis JLWM 1411 Error Code 31 #428618
    lerch
    Participant

    Re: John Lewis JLWM 1411 Error Code 31

    Hi Richard

    Malfunction in electronic pressure switch circuit, check the following:-
    Wiring, electronic pressure switch or main pcb.

    If this doesn’t help let me know and I can send you the service manual 🙂

    in reply to: Whirlpool adp4601 851150415830 Error 06 #427607
    lerch
    Participant

    Re: Whirlpool adp4601 851150415830 Error 06

    F6. 6 Flashes. Water valve (WV1) is switched on but flow meter (FM) senses no impulses (less
    than 10 impulses in 10 secs.) and the water indicator (WI) is at a low level
    Water Valve Closed. Water inlet hose blocked.
    Water inlet valve (WV1) defective. Flow meter (FM) defective (leads to FM failure)

    in reply to: Hoover VHD147a #427585
    lerch
    Participant

    Re: Hoover VHD147a

    Hi atech,

    Are you looking for the answer, fault code or for ideas?

    What have you checked / metered so far?

    in reply to: Dedietrich Service Manual #423385
    lerch
    Participant

    Re: Dedietrich Service Manual

    Do you require it for error codes or do you require general help?

    in reply to: Prima PRLD350 #423310
    lerch
    Participant

    Re: Prima PRLD350

    Just checked and found it listed under a Gias appliance so Hoover / Candy.

    in reply to: LG door seal removal tool #420587
    lerch
    Participant

    Re: LG door seal removal tool

    Hope this helps 🙂

    in reply to: Fisher & Pykell #411625
    lerch
    Participant

    Re: Fisher & Pykell

    Quite easy to work on, do you have a model number I may have a manual I could send?

    in reply to: Kuppersbusch igb6508.1/16 fd8912 #404541
    lerch
    Participant

    Re: Kuppersbusch igb6508.1/16 fd8912

    436 685 drain pump

    in reply to: Maytag defrost heater #404531
    lerch
    Participant

    Re: Maytag defrost heater

    I am guessing you have already done a Google search?, if not see below.

    http://sparesdirect.com/61006079-heater-defrost-maytag

    http://www.appliancepartsquick.com/serv … TER/Detail

    in reply to: Diplomat ADP8352 dishwasher #404505
    lerch
    Participant

    Re: Diplomat ADP8352 dishwasher

    The error shown is E5, first three lights – the dishwasher is overfilling or flooding as per technical manual.

    in reply to: Kuppersbusch igb6508.1/16 fd8912 #404539
    lerch
    Participant

    Re: Kuppersbusch igb6508.1/16 fd8912

    If the correct model is IGV6508.1 GE (SMVKBM02/16)??? then the part number for the heat pump is:- 436 682 or if it is a instantaneous water heater complete (like the Bosch one)try 427 138.

    in reply to: Another website steals error codes thread #404100
    lerch
    Participant

    Re: Another website steals error codes thread

    All that does is make it easier for the public to diagnose and have a go at repairing their own appliances which in turn takes the work off the skilled engineers, not very helpful. ❓ ❓

Viewing 15 posts - 1 through 15 (of 353 total)