[lyndy]

Re: whirlpool dishwasher adg7560

It’s an integrated dishwasher so can’t see leds flashing when machine faults

[lyndy]

Re: Diplomat ADP8242 dishwasher

Thanks for your help

[lyndy]

Re: Diplomat ADP8242 dishwasher

Yes i do mean dishwasher.
No it doesnt seem to bleep at all. It just continuously washes, it heats but wont drain unless you manually put it on drain.

[lyndy]

Re: Zanussi dishwasher ZDF3020 Error code 61

Thanks for this – do you know how to enter into the diagnostics for this machine?

[lyndy]

Re: Dishwasher locking out on inlet valve

We’ve reset the valve. It fills once again, locks out again. We’ve check all hoses again and reset valve again…..same problem.

‘Locked out’ – as in, valve won’t open. Pressure switch on top of valve stops water coming in

[lyndy]

Re: LG side by side fridge freezer diagnostics?

Thanks

[lyndy]

Re: Zanussi dishwasher error code

Thanks for this. Wondered if you could shed any more light:

Was not enough water getting into the wash tub – have changed the level control switch but there still is not enough water entering the machine.

Have pinched the tube to the overfill pressure switch in case this was faulty – similar amount of water still going in.

Any ideas?

[lyndy]

Re: Carbon brushes needed 0 Whirlpool washing machine

thanks guys

[lyndy]

Re: Hotpoint DWF30N dishwasher not drying

thanks for this guys

[lyndy]

Yeah I know – we use TDS too but difficult to order some bits via RC as you know.

[lyndy]

Its a RC approved job – the front tub we have is listed on CDSL as a spare for this model.

We’ve managed to get the machine written off now.

Thanks guys

[lyndy]

Re: Zanussi washing machine bung – Urgent!

Its an open hole – water will come through when the machine is in use. A bung is needed.

[lyndy]

Re: Zanussi Washing Machine E30 and E70 error codes

Thanks Martin

[lyndy]

Re: Hotpoint washer dryer resistive values

Thanks Jim

[lyndy]

Re: Bosch Induction Hob

Apologies – model number is PIE640Q01E/03

[Author]

Posts