lyndy

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 51 total)
1 2 3 4
  • Author
    Posts
  • December 19, 2016 at 3:06 pm in reply to: Zanussi washer dryer fault code? E20? #443878
    lyndy
    Participant

    Re: Zanussi washer dryer fault code? E20?

    🙂 Thanks!!

    July 29, 2016 at 8:14 am in reply to: Daewoo washer dryer temperatures #439743
    lyndy
    Participant

    Re: Daewoo washer dryer temperatures

    Yes, there is a thermistor, but we’re just surprised the TOC hasn’t cut out at that high a temperature? There’s no info anywhere at what temperature the drying cycle should run at.

    March 1, 2016 at 4:56 pm in reply to: AEG L75480WD washer dryer (dry fault) #435910
    lyndy
    Participant

    Re: AEG L75480WD washer dryer (dry fault)

    Yes, insulation has been checked.

    Our email is info@abbeyappliances.co.uk

    Thank you

    March 1, 2016 at 4:27 pm in reply to: AEG L75480WD washer dryer (dry fault) #435907
    lyndy
    Participant

    Re: AEG L75480WD washer dryer (dry fault)

    PNC 91460560500
    SERIAL 34800272

    February 10, 2016 at 10:29 am in reply to: Bosch SMS40C02GB/07 dishwasher filling issue #435226
    lyndy
    Participant

    Re: Bosch SMS40C02GB/07 dishwasher filling issue

    Thank you for your replies.
    Martin, looking at the parts diagram I cant see it has a reed switch on it? Am i missing it?

    January 9, 2016 at 9:08 am in reply to: SMEG BUILT UNDER DOUBLE OVEN DOOR ISSUE #434329
    lyndy
    Participant

    Re: SMEG BUILT UNDER DOUBLE OVEN DOOR ISSUE

    Have checked all of the above, parts correct and door glass fitted. Oven door is correctly aligned etc. Spoke to Servevast and they said it’s just because hinges are new but we’ve never known them be that ‘springy’! Just wondered if anyone has experienced the same problem.

    January 6, 2016 at 4:22 pm in reply to: URGENT help required – HOTPOINT washing machine #434235
    lyndy
    Participant

    Re: URGENT help required – HOTPOINT washing machine

    We’ve just been back to this machine and checked the pressure – 4.5 bars. The manual states the machine works on a minimum of 0.5 bars and maximum of 10 bars.

    We are completely stumped now. Can anyone shed any more light on this fault?

    January 5, 2016 at 3:28 pm in reply to: URGENT help required – HOTPOINT washing machine #434231
    lyndy
    Participant

    Re: URGENT help required – HOTPOINT washing machine

    Our engineer doesn’t believe it’s low water pressure but we are going out again tomorrow (tenth time!) so will check again. Severn Trent Water has also attended and said there is nothing wrong with her water supply.

    July 14, 2015 at 1:44 pm in reply to: Beko washing machine fault #428732
    lyndy
    Participant

    Re: Beko washing machine fault

    Thank you for your reply.
    Can someone please advise and explain how a pressure sensor metalflux actually works?

    April 28, 2015 at 8:15 am in reply to: Panasonic NA-140VZ4 washing machine error H37 #426783
    lyndy
    Participant

    Re: Panasonic NA-140VZ4 washing machine error H37

    Thats lovely. Thank you for your reply.

    March 27, 2015 at 4:44 pm in reply to: Hoover w/machine Door Interlock fault #425945
    lyndy
    Participant

    Re: Hoover w/machine Door Interlock fault

    Many thanks

    November 6, 2014 at 9:06 am in reply to: WHIRLPPOL AWO SERIES DIAGNOSTICS? #421134
    lyndy
    Participant

    Re: WHIRLPPOL AWO SERIES DIAGNOSTICS?

    Are these the most common faults on these then?

    February 28, 2014 at 4:13 pm in reply to: Damaged Dishwasher #410462
    lyndy
    Participant

    Re: Damaged Dishwasher

    LFT114 – now discontinued

    February 28, 2014 at 2:53 pm in reply to: Damaged Dishwasher #410460
    lyndy
    Participant

    Re: Damaged Dishwasher

    Board has completely blown where the dispenser connector was attached. Literally went pop.

    February 28, 2014 at 2:40 pm in reply to: Damaged Dishwasher #410457
    lyndy
    Participant

    Re: Damaged Dishwasher

    Yes – it’s a fully integrated dishwasher, less than 2 years old

  • Author
    Posts
Viewing 15 posts - 16 through 30 (of 51 total)
1 2 3 4