megawatt

Forum Replies Created

Viewing 15 posts - 76 through 90 (of 167 total)
  • Author
    Posts
  • in reply to: ISE Vestel 1600. #309527
    megawatt
    Participant

    Re: ISE Vestel 1600.

    Update for those interested. I had to subsequently do a bearing change on this machine. Removing the springs enabled me to get more grease at the point of contact. This seems to have solved the problem.
    Regards,
    Mike

    in reply to: Faulty parts #309144
    megawatt
    Participant

    Re: Faulty parts

    Hope no one asks for mine as they are long gone.
    Mike.

    in reply to: hoover dryer HNV160-80 #308068
    megawatt
    Participant

    Re: hoover dryer HNV160-80

    I would try using a current clamp on meter to find out how much current the heater is pulling,
    Regards,
    Mike.

    in reply to: AW23 front weight #307333
    megawatt
    Participant

    Re: AW23 front weight

    Had the same problem a few months a go. On ballance from what I see the AW23 seems to have a low failure rate.
    Regards,
    Mike.

    in reply to: AW23, PO5. #307208
    megawatt
    Participant

    Re: AW23, PO5.

    Thanks,
    Mike.

    in reply to: Hotpoint WD420 dryer light flashing. #303795
    megawatt
    Participant

    Re: Hotpoint WD420 dryer light flashing.

    BRILLIANT!!! You’ve saved my reputation and an old lady’s £100.
    Thanks,
    Mike.

    in reply to: Hotpoint WD420 dryer light flashing. #303793
    megawatt
    Participant

    Re: Hotpoint WD420 dryer light flashing.

    Thanks for the reply Chris. This is not a fault code on the vertical lights but it is on the horizontal lights on the right. It looks like it is trying to remind the user of something to do with the dryer?? Am I missing something?
    Mike.

    in reply to: Wight knight 6kg dryers. #302654
    megawatt
    Participant

    Re: Wight knight 6kg dryers.

    Thanks guys.
    Regards,
    Mike.

    in reply to: AEG L54810 winking at me five times. #296635
    megawatt
    Participant

    Re: AEG L54810 winking at me five times.

    Thanks for the info Martin. I will try and sort it tomorrow.
    Regards,
    Mike.

    in reply to: Indesit WIL 153 #295619
    megawatt
    Participant

    Re: Indesit WIL 153

    Thanks for the reply, I will send the board off to EMW.
    Regards,
    Mike.

    in reply to: Indesit WIL 153 #295617
    megawatt
    Participant

    Re: Indesit WIL 153

    Thanks for the reply Suedehead. I think it will be a beyond economical repair job but just out of interest does this series give fault codes?
    Regards,
    Mike.

    in reply to: Ise5 conditioner #257962
    megawatt
    Participant

    Re: Ise5 conditioner

    Looks like I have got the same problem. Is their any hot updates.
    Regards,
    Mike.

    in reply to: CI555WH marks on laundry. #285043
    megawatt
    Participant

    Re: CI555WH marks on laundry.

    Did a boil service wash, 40 wash on colours, 40 wash on whites and a 60 wash on whites. Laundry ok and no grooves on the boot. Avised customer on various aspects of washing and left it with her for test. No calls after four days so I hope thats the end of it,
    Regards,
    Mike.

    in reply to: Washer rentals, is now a good time? #285654
    megawatt
    Participant

    Re: Washing machine rentals.

    I am convinced it is a good road to go down. Not sure about a credit lisence, why do I need one? I agree that it may be good to air the subject in the general trade forum, if any one wishes to transfer the topic please feel free.
    Regards,
    Mike.

    in reply to: CI555WH marks on laundry. #285040
    megawatt
    Participant

    Re: CI555WH marks on laundry.

    How do I insert photos on forum?

Viewing 15 posts - 76 through 90 (of 167 total)