Forum Replies Created
-
AuthorPosts
-
Minge
ParticipantRe: KGU3102gb/51
oh ok.. and also there is a 68 number in diagnostics? what does this mean?
im suspecting sensor or pcb problem as fridge is ok but freezer doesnt seem to freeze icecream etc.
evaporator seems ok not over frozen and fan is running.
any ideas guys?
Minge
ParticipantRe: Pansonic microwave fault code.
The fault was actually one of the magnotrons short circuit. Thank you far all you advice anyway.
Minge
ParticipantRe: ariston mba3842cuk
would this affect the fan from coming on?
Minge
ParticipantRe: neff cooker hood – enrd8901n0gb
sorry also blows on level 3.
Minge
ParticipantRe: WHIRLPOOL DW ADG7540/1
worked! thanx penguin.
💡 😛
Minge
ParticipantRe: KDW243A (IP21) serial number 001551
thanx n e way 😥
Minge
ParticipantRe: SAXON SM100PX COOKER TRIPPING
its tripping the rcd…
on main oven when cooling down, although tested the grill element in small oven, slightly low but the problem is with main oven??? and not when in use .. during cool down!!Minge
ParticipantRe: BFV60 DISHWASHER
Yes Sorry, its a member of the office staff using his account, dont know what im doing so sorry 😳 , are you able to help me here or do i have to log another enquiry?? ❓
Minge
ParticipantRe: WHIRLPOOL DW ADG7540/1
🙂 cheers for the advice, will give it a try.
Minge
ParticipantRe: WHIRLPOOL DW ADG7540/1
Hi!
There are no pauses between the flasehs. just constant flashing and beeping.??????????
Minge
ParticipantRe: LG WDM1285FHD
i know! ha ha… but the customer needs a quote. 😥
Minge
ParticipantRe: SPARES FOR NEUTRO WM602
thanks alot guys!! will be on order tommorrow!! hope fully all correct 😉
cheers again.
Minge
ParticipantRe: CREDA SOLAR PLUS 48337
ok… thank you!! i have already replaced the regulator so i am guessing the element unit is needed….. sorry for the confusion!!!
and thank you for the advice!!!!
😛
Minge
ParticipantRe: NEFF COOKER HOOD D8150N0/01
Unfortunately …No manual!!
great help i know!the hood i is vented rather than having the use of charcoal filters and the grease filters are pretty clean… any other thoughts please????
January 29, 2008 at 9:32 pm in reply to: Diplomat AHY36 (620) oven – update – MAIN SELECTOR! #240952Minge
ParticipantRe: Diplomat AHY36 (620) oven – not heating – element proble
hi … just to throw a spanner into the works… so to speak! ha ha… but it definately check the element first with a resistance test… i doubt the element will be faulty if it occassionally comes on… it sounds ,more like a dodgy thermal cut-out or something? good luck!
-
AuthorPosts
