Minge

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 64 total)
1 2 3 4 5
  • Author
    Posts
  • April 19, 2010 at 9:05 pm in reply to: Hotpoint WD640 – not draining!! #317749
    Minge
    Participant

    Re: Hotpoint WD640 – not draining!!

    Just thought id let ya know… it was the PCB!! It was supplying the inlet valve as you said 😆

    Cheers for the advice.

    April 12, 2010 at 6:48 pm in reply to: Hotpoint WD640 – not draining!! #317747
    Minge
    Participant

    Re: Hotpoint WD640 – not draining!!

    cheers ian – so this dont seem normal for this model?

    November 19, 2009 at 7:44 pm in reply to: Bosch SPS6462GB/06 stopping dead. #302815
    Minge
    Participant

    Re: Bosch SPS6462GB/06 stopping dead.

    wires all seem ok… any other suggestions please?

    November 16, 2009 at 8:08 pm in reply to: DIPLOMAT ADP8332 4 BEEPS #293609
    Minge
    Participant

    Re: DIPLOMAT ADP8332 4 BEEPS

    never got to the bottom of it… suspect needs programming which i am unable to do 🙁

    November 4, 2009 at 3:38 pm in reply to: LG drum change/pulley help #302561
    Minge
    Participant

    Re: LG drum change/pulley help

    yep – was the same as yours mike! Waiting for washer to arrive then i will give it a go.

    heres hoping 😆

    November 3, 2009 at 9:32 pm in reply to: LG drum change/pulley help #302559
    Minge
    Participant

    Re: LG drum change/pulley help

    Thanks guys!! Just a quick one now tho … please can you reassure me this is the washer that will fit around the shaft (with a bigger hole) and not the original washer on the appliance. Cheers. Minge

    November 3, 2009 at 8:40 pm in reply to: LG drum change/pulley help #302556
    Minge
    Participant

    Re: LG drum change/pulley help

    Excellent! Cheers Bob. Does the washer go behind the pulley or infront of it?

    July 31, 2009 at 6:58 pm in reply to: DIPLOMAT ADP8332 4 BEEPS #293606
    Minge
    Participant

    Re: DIPLOMAT ADP8332 4 BEEPS

    insulation tests ok???

    April 16, 2009 at 2:30 pm in reply to: whirlpool 10kg tumble dryer 3RAW2480EMQO #283185
    Minge
    Participant

    Re: whirlpool 10kg tumble dryer 3RAW2480EMQO

    it blows black, not wexactly sure what it feeds?

    My initial feeling is motor, but the appliance mega tests ok.

    March 17, 2009 at 8:07 pm in reply to: AEG 72630 #278742
    Minge
    Participant

    Re: AEG 72630

    e52 – definitely motor issue. 😉

    March 17, 2009 at 8:06 pm in reply to: DIPLOMAT DISHWASHER ADP8322 fills and stops – 3 beeps #279104
    Minge
    Participant

    Re: DIPLOMAT DISHWASHER ADP8322 fills and stops – 3 beeps

    Whaty do the 3 beeps mean please?

    March 1, 2009 at 11:36 pm in reply to: AEG 72630 #278740
    Minge
    Participant

    Re: AEG 72630

    e35 – Analogic Pressure switch problem, if you havent changed the element just check that as this can also sometimes throw up the e35 fault code, not sure why but does! Obviously before changing the analogic (black) pressure switch check for blockage etc.

    I used to work for service force so know these machines well!!…..

    January 28, 2009 at 6:27 pm in reply to: ADP8332 WIERD FAULT???? #275260
    Minge
    Participant

    Re: ADP8332 WIERD FAULT????

    There is no label on the side, sorry!! The insulation tests ok no earth leakage apparent.

    The part number from connect fitted twice is :- 5045170846046

    Any ideas?

    To clarify, this is gonna sound strange ha ha but the writing on the display when the new board fitted looks like something from The Predator movies… know what i mean? Ha ha…

    January 8, 2009 at 11:14 pm in reply to: BOSCH COMBI MICROWAVE #273441
    Minge
    Participant

    Re: BOSCH COMBI MICROWAVE

    I carried out insulation tests on whole appliance, the fan element, the grill, the magnetron… it has a main pcb which holds the diodes and transformer/heat sink.


    Sorry!! the enr is H5972NOGB/01

    thanks for the quick reply!!

    November 23, 2008 at 3:52 pm in reply to: zanussi zwf1010w #269096
    Minge
    Participant

    Re: zanussi zwf1010w

    Possibly the recirculation pump.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 64 total)
1 2 3 4 5