Minge

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 64 total)
1 2 3 4 5
  • Author
    Posts
  • September 24, 2008 at 8:08 pm in reply to: BOSCH H5962NOGB/01 – TRIPPING ELECTRICS #263035
    Minge
    Participant

    Re: BOSCH H5962NOGB/01 – TRIPPING ELECTRICS

    yeah door switches seem ok?

    September 8, 2008 at 5:14 pm in reply to: HOMARK 05-700105 #261802
    Minge
    Participant

    Re: HOMARK 05-700105

    yeah guess im gonna have to change them anyway… i know just conventional with no fan can take this length of time was just unsure with the fan inclusive… thanks anyways guys!

    September 8, 2008 at 5:12 pm in reply to: BOSCH DISHWASHER SGS43A52/GB35 #262026
    Minge
    Participant

    Re: BOSCH DISHWASHER SGS43A52/GB35

    Easier to order from one place rather than having various deliveries 😉 ha ha

    There was no programming info within box? Is thios neccessery? If so any idea where i can get this info from? 😉

    September 8, 2008 at 4:03 pm in reply to: HOMARK 05-700105 #261800
    Minge
    Participant

    Re: HOMARK 05-700105

    I have tested the elements for continuity and there has been no change in mega testing them after heating. Do you know if 30mins for conventional oven with fan is excessive time please?

    September 4, 2008 at 9:48 pm in reply to: STOVES 900 GTF constantly sparking #261780
    Minge
    Participant

    Re: STOVES 900 GTF constantly sparking

    Sorry about the caps!! lol … too late when i pressed submit i realised! . lol

    September 1, 2008 at 9:28 am in reply to: STOVES 900 GTF – 059041459 Help! No gas coming through!?! #261299
    Minge
    Participant

    Re: STOVES 900 GTF – 059041459 Help! No gas coming through!?

    Ah! this may be the problem then. I was testing the oven with the rear panel off!. ha ha. DOH.
    But would this also cause the main oven not to even spark? (if i bypass pressure switch point ‘C’ To ‘l2’ on the main pcb it sparks???

    August 31, 2008 at 10:10 am in reply to: STOVES 900 GTF – 059041459 Help! No gas coming through!?! #261296
    Minge
    Participant

    Re: STOVES 900 GTF – 059041459 Help! No gas coming through!?

    the stir fan, it isnt coming on at all. The cooling fan starts straight away. I checked the hose and it is pushed into the hole. could it be the pressure stat itself? does it control both oven gas supply then?

    August 21, 2008 at 10:08 am in reply to: bosch d/washer sgs55c02gb/01 #260321
    Minge
    Participant

    Re: bosch d/washer sgs55c02gb/01

    thanks alot guys!! i suspect jamed diverter then.. i did remove the grey ducting i tried pushing the diverter round but was so stiff didnt wanna break it… so i guess this is the problem… will give it ago. Thanks again.

    😳

    August 18, 2008 at 4:45 pm in reply to: BEKO DVC6531 hob not hot enough? #260108
    Minge
    Participant

    Re: BEKO DVC6531 hob not hot enough?

    hi andyvivo,

    It looked ok.. always tend to have a quick browse over the blocks when attending cos i know they can be buggers for burning out. Admittantly i didnt take the cover off tho. Surely other parts on that side would not work correctly tho?? Strange why its only that ring?

    August 14, 2008 at 2:29 pm in reply to: Neutra WM602 #259890
    Minge
    Participant

    Re: Neutra WM602

    Thank you very much 😀

    August 8, 2008 at 6:28 pm in reply to: Brandt VF300 Dishwasher #259265
    Minge
    Participant

    Re: Brandt VF300 Dishwasher

    hi! The only numbers i could see are on a small white label as follows ….

    1 5459 c 094

    32×0716 P1 3
    17/03
    80027

    Any ideas???


    :rolls:

    August 5, 2008 at 5:36 pm in reply to: Whirlpool FH fault code #196293
    Minge
    Participant

    Re: Whirlpool FH fault code

    Hi i had this fault today. I cheacked the pressure switch and also cleaned outthe chamber by the element. customer phoned back and said same fault. do you think it will be the pressure switch.

    August 5, 2008 at 5:33 pm in reply to: Wf240 #259018
    Minge
    Participant

    Re: Wf240

    I fitted this part number from connect 5031689497770 can you tell me what drum shaft goes with it

    July 15, 2008 at 12:54 pm in reply to: neff sms4472gb/14 – sticking in cycles #257736
    Minge
    Participant

    Re: neff sms4472gb/14 – sticking in cycles

    Thanks, i have used that site many times but am unsure if this is possible to be a timer fault, also am unable to locate that cut-out or sensor at the moment on their site.

    Thanks again.

    July 4, 2008 at 4:54 pm in reply to: hotpoint wf220 #256501
    Minge
    Participant

    Re: hotpoint wf220

    Yes full load and empty the same result.

  • Author
    Posts
Viewing 15 posts - 31 through 45 (of 64 total)
1 2 3 4 5