Forum Replies Created
-
Posts
-
Bearing seal available at https://www.ebid.net
Search for listing 207278914Murv…
If you are still having problems start at the Miele UK home page https://www.miele.co.uk
Murv…
C00209033 Now Obsolete.
Remove the pulley(s) and fit stretch belt part no. C00109620.
Would also check the front bearings are good – Part no C00204438 if required.
Murv…
Location and language cookie need setting.
Try using this link –
https://www4.miele.de/msd?vg=VG-DE&country=en&language=enMurv…
Service manual states:
F5: Inadequate water supply
Possible problems:
1- Make sure the water input tap is totally open and that there is no water cut.
2- Close the water input tap, separate the water input hose from the tap and clean the filter
at the connection end of the hose. 3-Water inlet hose can be out of order.
4-Water inlet valve filter can be clogged. 5- Water inlet valve can be out of order.
6- There can be a problem with the cable connection of water inlet valve.
7- Floater switch can be out of order or have a problem with the cable connection.
8- Pressure switch of the heater casing group can have a mechanical or cable connection
problem.
9- Circulation pump can be out of order or have a problem with the cable connection.Pins number 1-5.
Centre pin (3) ground,
Pin (4) Vcc (could be 12v on your version)If you can’t get it repaired just supply the product codes on the rating label and I will check if I have the module/software in stock.
Murv…
