Forum Replies Created
-
Posts
-
Re: AEG PNC914524113 L74810 module configuration
Thanks Seamy, that’s what I had guessed. but nice to have it confirmed. Best Regards Neil :boops:
Re: AEG L63742VI Fault
Hi,
Email is kenbowmanandson@hotmail.co.uk
Many Thanks
NeilThe brushes were low which is what I think kicked off the F21 Error. Brushes changed, machine on test, all seems well. 🙂
Regards NeilGreg I think you are wrong about the module I have just had the same fault on a bosch classixx6 1200 WAE24363GB, and it appears once the error code comes up you have to reset the module. there are two ways 1)Turn programme switch to 6 o clock,hold RPM button turn switch to spin, release RPM button 2)turn it to spin (the six o’clock position), then hold down the RPM/Spin button and turned the dial one click clockwise and then let go of the RPM/Spin button. (the rinse hold light lit up and it beeped) I then switched to off and then back on. and it is currently on test and working fine Regards Neil 🙂
Re: bissell 7920 carpet cleaner.
Hi, The biggest problem with these machines is that the inlet and outlet tubes on the heater chamber become blocked. if you use a small screwdriver or drill to clean them out. the other problem they have is with the pumps but this is not as common and usually requires replacement
Neil
