[neilbow]

Re: candy civ100

Hi, If you send me your email address via pm I will send you the manual with the wiring diagram Regards Neil

[neilbow]

Re: Graffters

Sorry Steve cannot help you there, we only did the domestic stuff.

Regards

Neil

[neilbow]

Re: Graffters

Repairing domestic and commercial appliances at their pubs around Britain, we use to do them around the north London area.

Regards
Neil

[neilbow]

Re: Graffters

Hi, Shame about all at Graffters, have done work for them since 1999 really nice people. From what I can gather there accounts manager got caught with his hand in the till ??, which left them with a cash flow problem

[neilbow]

Re: Hoover twin tub parts.

What exactly do you require as these motors can be bought in component form, are the good old days where you could buy armature, Field coils, top bearings etc. separately.

Regards
Neil

[neilbow]

Re: AEG L12710VIT 914601233

Yep checked both, insulation and continuity on both the motor and element. 😥

[neilbow]

Re: HVL211(UK) flashing lights

Thanks Jim. I had posted the module off to EMW in the mean time and it came back with no fault found, I cleaned and squished all the connections and the machine now works fine. thanks

Neil 🙂

[neilbow]

Re: Hoover DYN8164D

Yes it is a sealed tub part number 41022796 Tub complete. but surely it should be under 12 months old. get Hoover out to sort it out.
Regards Neil

[neilbow]

Re: Hoover twin tub parts.

We still have stocks of some hoover twin tub bits. If anybody needs any let me know and I will check stock. Regards Neil

[neilbow]

Re: Whirlpool Fridge Freezer ART766/NFV 85647661500

with the thanks of Bob problem traced down to faulty transformer at rear of fridge freezer. Neil

[neilbow]

Re: Hoover HNL662

The suspension on this machine gives very little trouble cannot remember the last time we fitted one, more likely to be a drum spider cracked. Neil

[neilbow]

Re: Hoover se147 31002754

:boops: You are right I should of double checked my facts not gone from memory it is the release tab that can be accessed from the sump hole:-
each Drum Paddle can become accessible through the Tank’s drain hole, after having removed the rubber Drain Pipe. Then, manually rotate the Drum to make the Paddle coincide with the drain hole. Next, with a flat screw driver, lift the metal tongue that holds the Paddle in position. After having lifted the Drum’s metal tongue, from inside the drum push the old Paddle in the sense of the arrow in order to remove the old paddle from it’s housings. Operate in reverse order, to fit the new spare Paddle.

Regards Neil

[neilbow]

Re: Hoover se147 31002754

If you lie the machine on it’s side and take the sump hose off you can get the screws in. Job Done.

Regards Neil

[neilbow]

Re: hoover vhc391 tumble drier

Hi, Never had this problem. can send you wiring diagram if that helps.need product code. regards Neil

[neilbow]

Re: Hoover HFI3015 Dishwasher – Not heating

Hi, If you give me your email address I can send you the test procedures Regards Neil 😉

[Author]

Posts