Forum Replies Created
-
Posts
-
Re: bosch sgv48m43gb/82 D/W not completing cycle.
Hi, yes. I had to configure it. Before I put pcb in, machine wouldn’t do anything.
Re: 1607w E10 fault
Conclusion. Stacking ISE dryer had leaked onto washing machine and blew control pcb.
Re: Manufacturer No 2 looking for agents
Feels like i’m missing out due to not doing regas work??? Where do i get training from to get this please?
Re: Manufacturer Seeking Agents
I am a WTA member. Didn’t go to last meeting though. Spoke to John Hopwood the other day. He told me to contact you so i don’t miss out. RT
Re: Manufacturer Seeking Agents
Just seen the thread for new work. I clicked on the link and it said i wasn’t allowed to see content. Whats it all about please Kenneth. Cheers
Re: Lux w/m EWX14440w says ED4 fault
Hi, are you saying that the drying elememnt stops the a wash cycle from working even though the dryer operates when set?
Re: 1607w E10 fault
On this model its just a normal pressure switch unlike the 1606x which has a sensor? Just wondering if a valve is braking down under supply and causing pump to come on?
Re: 1607w E10 fault
Already checked that. Took it off and had a good look. Blew into pressure switch,chamber clear, that seemed fine?
Re: Samsung the new network
NVQ? I was trained by Graham Dixon…Nuff Said! Samsung sound like a shower. I know their fridges are a pile of pap. I don’t repair them cos i can’t guarantee that they won’t break down within 6 months. Whirlpools aren’t as cheap but are a better unit! Ask Herr Bosch! Good luck guys, i hope you don’t get fingers burn’t.
Re: Bosch Enr- WAS28466GB08 W/m stuck on 1 min left
Cheers Chris, sorry for not getting back to you. I never had the pleasure to find out as it was an insurance job. The customer made a fuss and had machine replaced. I now have a brand new element armed for next 1 min left fault. Thanks again
Re: Amica awct 12l
Have you checked if the motor is rusty on the left hand side. There may be a leak from the grey hose from the rear of soap dispenser running down. Doesn’t sound like pcb if it goes through a heat cycle.
Re: amica gas cookers
Yes, this is the case on every Amica gas cooker. I have previously asked this at BDC when it was open, and the manager asked Amica about this and they said that it conforms to B.S. Only answer is to start stocking the 1/2″ coupling on ya van.
