[peeler40]

Re: Bridge rectifier

Thank you Martin114 they have the one need ,

[peeler40]

Re: Beko 8kg washing machine WMB81241LW

Yes tried holding start/pause to no avail .Another puzzel with the washer ,when you rotate the program dial there is no program display except for just one 40 degree wash proberly the one she was useing when she pressed pause in the first place.

[peeler40]

Re: Bosch washing machine door will not lock

Thank you Martin ,will include the model number in the future .

[peeler40]

Re: Candy GOF462-80

Thanks for the replies the machine still will not reset .Will
follow your advice and take another look .Thanks again .

[peeler40]

Re: Whirlpool awo/d5556

Thanks leavemetogetonwithit looking how the valves are wired up
seems best , if i can open them up without wrecking them .

[peeler40]

Re: LG f1409tds

Thanks bazza500 .

[peeler40]

Re: LG WM1437BFD Pump

Thank your for the reply ally .Think i will put the job off to monday though
Best wishes Billy

[peeler40]

Re: LG WM1437BFD Pump

Thank you for the reply expertcat .
Would you know how the front comes off , is it the same has the Whirlpool and beko machine ? .

[peeler40]

Re: Hotpoint WF101 flashing prewash light

Thanks johnnyj
I should of mentioned even the door interlock will not
lock ,i did try a new interlock but it did not work .

[peeler40]

Re: Hotpoint WDL520P

Thanks for the replies i will take a look tomorrow .

[peeler40]

Re: Whit Knight cl311/1w

Thank you for your help
Best Wishes Billy

[peeler40]

Re: Whit Knight cl311/1w

Thanks maltheviking
But the number does not mean anything to me !
I typed it in the spares section of this site but nothing came up . Is
it a connect number ? .Sorry to be a nuisance .

[peeler40]

Re: Panasonic H43

Thanks for all the replies , I am keeping the mc so i disabled the anti flood
device and the mc works fine .If it was a customers mc ,as their is no visable leak i think i would try raising the switch slightly say one or two
millie .

[peeler40]

Re: Panasonic H43

Hi Jess .Last time i looked at the machine the only thing i noticed was
a gate valve operated possibly by some sort of a stepper motot built into
sump .Very strange .I have seen a leak detecter on a bosch that machine had a solid base , but the Panasonic has a hole in the base like most washers.I will have a look and report back .Thanks for the reply.

[peeler40]

Re: Panasonic H43

Thanks Dave ,The washing machine belongs to a fellow engineer and he has offerd me the mc for £40 i am thinking if i could not repair it i may get
my money back selling it for parts on ebay .

[Author]

Posts