Forum Replies Created
-
Posts
-
Re: ‘Xeros’ washing machine – beads & waterless!
It’s not a consumer machine – it’s a commercial appliance if it ever gets to the market. Dry cleaners “vac off” laundry as part of the process, so that bit won’t change at least.
Chris.
Re: Hotpoint WD72 filling with water when off
Turn off ONE of the fill hoses. If the filling stops, the valve on the stopped hose is the leaker. If the filling continues, the one that isn’t turned off is the leaker. Simples.
Water valves to fit your machine are HERE.
Penguin45.
Re: resistance readings on windings
Brush motor? Surprisingly low – anywhere around 5 ohms through field and armature is typical – tacho circuit is usually rather higher.
Penguin45.
Re: Its Official Then
No specific brand named or mentioned, Lee. Common sense should dictate that any major power using appliance should not be left unsupervised for any length ot time. Being professionals, we all turn the water off and unplug our major appliances before going on holiday, don’t we?
Penguin45.
Re: Hotpoint WMT01 wash speed problem.
I think you’ll find it’s behaving to specification, Steve.
Chris.
Re: Whirlpool continuous beep
Continuous flashing is F1 – ntc sensor. You’ll need THIS CHAPPIE. It’s sticking up in the sump and is a twist fit from underneath.
Power off first.
Penguin45.
Re: Football season 09/10
Liverpool/Man C draw was the perfect result yesterday, today’s modest little victory puts us clear in 4th. 😀
Chris.
Re: Whirlpool single oven G2P 62F/SS – Heating up problem
Around 25 ohms is about right. They work or they dont, BTW – no half measures.
Replacement elements are HERE.
Penguin45.
