Forum Replies Created
-
Posts
-
Re: Hoover AM 120 strange timer operation
Buy THIS – problem solved. It’s a motorised selector switch; the original version falls over for fun.
There are 36 holes in my 99GL……. 😥
Penguin45.
Re: aeg lavamat turbo 16810
What does it do between 54 and 52 minutes? By drain the soap powder, do you mean that it is filling with water?
I’m afraid your description of the fault is not clear.
Penguin45.
Re: Siemens Dishwasher SE 25235 GB – All LED’s are on
It’s not logical, therefore the prime suspect is the pcb.
Penguin45.
Re: BAUMATIC BF62W
BFD62W.
010310003 – holder
030150008 – O ring
010300002 – nutPut 672 on the front if you want to order from Baumatic and wait forever.
Chris.
Re: Bosch no spin problem
Motor is almost certainly fritzed – armature damaged and generating noise which the pcb doesn’t like.
Chris.
Re: intigrated slimline dw hja8362
It’s a Beko, so quite adequate on the quality front. By “powers up”, I take it you mean that the light doesn’t come on? The neon is just switched by the I/O switch. If it’s otherwise dead, I’d be looking at the pcb.
Chris.
Re: Electrolux EWT1221 knocking sound when spinning?
Shock absorber or concrete weight loose, perhaps? Damaged belt can make some funny noises.
Penguin45.
Re: Whirlpool AWM1866?
Nice old machine. Key word there is old… The drum and backplate can be removed through the back of the casing by undoing the large clamp band around the rear of the tub, which will give you total access. Be advised that it is extremely tricky to put it back exactly right to avoid leaks.
Power off first.
Penguin45.
Re: beaumatic dw bdw 2ss
It’s just a Chinese dishwasher, so pull it until the latch breaks and hope that the facia doesn’t. If you’re really, really lucky, the installers may not have put the top screws in, so you might be able to pull the machine forward and undo the loop from the top. But I doubt it.
Chris.
Re: postage or carrier
You might want to have a think about that, Phidom. One board returned in it’s original packing is less than £2 (Which I add to the customers cost). If you don’t return it, EMW charge a £10 surcharge.
Chris.
Re: F&P Smartdrive 9 Fault
Normally a water valve problem – probably the cold valve. There is no model 9.
Penguin45.
