[QUICK FIX]

Re: tricitybendix biw105w washing machine

need to access the diagnostic check

[QUICK FIX]

Re: Creda TCR2 Tumble Drier – short circuit?

water lying in the back panel

[QUICK FIX]

Re: VTDOOP drum

was at one today where you cant change the drum shaft you need a whole drum answer put it in a skip 18 month old

[QUICK FIX]

Re: Bosch Dishwasher – fill never completes (Starts to drain

:boops:

[QUICK FIX]

Re: LG WM1480F squeeking terribly on fast spin

could still be bearings could be shockers though anti vibration feet not much good

[QUICK FIX]

Re: Bosch Dishwasher – fill never completes (Starts to drain

impellor jug had same fault last week

[QUICK FIX]

Re: Stupid Christmas..

or go to the hoover.co.uk website and play with the decorations

how sad am i

[QUICK FIX]

Re: aeg motor anti tamper bolts

hotpoint to long anyway would rather get something to remove them with properly.breaking bolts could attack them with angle grinder but there position aint that easy

[QUICK FIX]

Re: aeg motor anti tamper bolts

the bearings can be relaced in these ones fhp type you need pullers and a vice and it can be done trust me done plenty.the poulleys are not welded on i refer to aeg machines models ranging from the first lavamat 561 971 605 610 6080 all these type no sole or ceset.

[QUICK FIX]

Re: Unprogrammed PCB to the public

i thought by law they had to supply you with a programmed pcb but can charge a dearer price for it

[QUICK FIX]

Re: LG WM14445FDS

out of balance

[QUICK FIX]

Re: tricity bendix TM321W

IS THE OVEERFILL FOR THE CONDENSER FULL TRY LOOKING AT THE BACK DOWN THE BOTTOM SHOULD BE A HOSE WITH A CLIP ON IT TAKE IT OFF AND DRAIN

[QUICK FIX]

Re: LG WM-12225FD spinning problem

try changing the shockers but lg well known for vibration

[QUICK FIX]

Re: Thinking of moving to Spain ?

correct

[QUICK FIX]

Re: Asko W90 (aka 10504) only spins

if you put in on at the start and it goes straight onto spin more likely the timer could be motor but more likely timer fault.they were bad for maybe washing for 5 mins then the timer just clicked round to off position and stopped full off water.

[Author]

Posts