Forum Replies Created
-
Posts
-
Re: AEG door seal replacement
the 50500 is a aeg not zanussi type should go on no probs and its a clamp with a 6mm socket to tighten and slacken
Re: AEG LAV50500 programmer errors
you need a door switch 645201231 part number timers very reliable in that model 50500
Re: What’s the most stupid things customers say?
was asked today when i could go and connect a machine asked customer when machine getting delevired reply was havent bought one yet………….
Re: Whirlpool ADP 5962 F7 fault
the left hanside when you removed side panel has a plastic tank flow meter is in it you should see wires going to a small pcb
Re: Every Once In A While…
was a lot harder years ago when the askos came with the non flex hard pastic nylon type hoses dont know how many i went to for the valves being cross threaded.had to change the valve then make sure i didnt do it to
Re: What’s the most stupid things customers say?
if i new thats all it was i could have fixed it myself
Re: LG D/W LD2130 overfilling
had one b4 even though the motor ran all the blades were all bocked so it doesnt push the water through properly so it thinks no water in machine keeps filling them fault code appears
Re: masterpart ebay shop
YES I WAS GETTING SOME ELEMENTS BACK IN JULY WITH MASTERPART NAME ON IT THEN HEY PRESTO PRICE MORE THAN DOUBLED WONDER WHY ALSO NOTICED CONNECT ARE DOING THIS TO.
Re: LG Dishwasher LD2060wh – motor
YOU HAve to remove lid and side panel and front panel,you can then put dishwasher on its side and then if your looking down on it remove screws which hold the base on to the cabinet allowing you to prise trhe base away enough for you to remove the motor then refitt be carefull for the float switch not to fall out,have done this on many occasions without total removal of base.
