ray.t

Forum Replies Created

Viewing 14 posts - 241 through 254 (of 254 total)
  • Author
    Posts
  • in reply to: Indesit is60v Tumble Dryer wiring diagram #271808
    ray.t
    Participant

    Re: Indesit is60v Tumble Dryer wiring diagram

    Hi, Sorted this now. 2 wires to timer had been put on wrong way
    Thanks for the help and diagram
    Cheers, Ray

    in reply to: hoover nextra hnd 325 D/W #270349
    ray.t
    Participant

    Re: hoover nextra hnd 325 D/W

    Hi Could you please pass this on to me too.
    I have one thats doing the same
    Cheers Ray

    in reply to: Indesit is60v Tumble Dryer wiring diagram #271805
    ray.t
    Participant

    Re: Indesit is60v Tumble Dryer wiring diagram

    Hi Thanks for the info, I now have the diagram for it.
    I have not meggered the machine as my megger is broken at the moment
    I have unpluged the heater and the motor and still it trips as soon as I press that start switch.
    Thanks, Ray

    in reply to: Indesit is60v Tumble Dryer wiring diagram #271802
    ray.t
    Participant

    Re: Indesit is60v Tumble Dryer wiring diagram

    Hi. If anyone could send me any information re wiring diagram I would be very grateful. My customer is getting on to me daily now.
    Many thanks. Ray.t

    in reply to: Hoover Aquamatic Model S4470 #271496
    ray.t
    Participant

    Re: Hoover Aquamatic Model S4470

    Hi You have a pm
    Andrew

    in reply to: hnwl 6136 #270649
    ray.t
    Participant

    Re: hnwl 6136

    Hi Martin, Thanks for that.
    The only lights that are on are the start light the door lock light flashes and the one that indicates 15 mins is on but not flashing.
    Thanks Ray

    in reply to: any idea how old this is #263674
    ray.t
    Participant

    Re: any idea how old this is

    Looks very much like a Kenwood Turn over toaster. My guess late 50s

    in reply to: Bendix BIW 126W #252803
    ray.t
    Participant

    Re: Bendix BIW 126W

    Thankyou very much Chris for your prompt reply. I will pass on that information to my customer, and hope it sorts her problem. Strange thing is she’s been doing the same routine and using the same detergent for a few months with no problems. Weird!. Anyway, thanks again.
    Ray.t

    in reply to: AEG cooker U7101-4-M #244026
    ray.t
    Participant

    Re: AEG cooker U7101-4-M

    Thankyou for your reply and suggestion Mike.
    On Monday the customer phoned and told me they’ve suddenly realized the cooker has an extended warranty. So we’ll never know.
    Thanks once again. Ray.t

    in reply to: Lg tumble dryer Mod C70045E #242224
    ray.t
    Participant

    Re: Lg tumble dryer Mod C70045E

    Thanks very much Bazza. I’ll go and check the motor and then give her the good news. Cheers. Ray.t

    Lucky Goldstar

    in reply to: Lg tumble dryer Mod C70045E #242222
    ray.t
    Participant

    Re: Lg tumble dryer Mod C70045E

    Thanks for your prompt reply. Is this TOC resetable or does it mean a new motor. If so have you any idea of cost? Thanks again. Ray.t

    in reply to: Lg tumble dryer Mod C70045E #242220
    ray.t
    Participant

    Re: Lg tumble dryer Mod C70045E

    Sorry, this didn’t come out very well. Fault was “no heat” I reset tripped stat on heater. Worked fine. Been back today. Fault is now, when prog selected and start switch pressed, after about 15secs, pump starts, but drum not turning. After a further 15 secs “Clean filter” and “dry” lights flash and starts beeping. Changed capacitor. No change. On first call and today checked filter and condenser. All OK
    Any helpor advice would be very gratefully received.
    Thanks very much Ray.t

    in reply to: VTD 00 #205390
    ray.t
    Participant

    Re: VTD 00

    Thankyou very much johnnyj. This information will get me out of trouble. Thankyou also for the additional information. This will also be of great use to me and I’ll make a note of it for future use.
    Thankyou very much once again.
    Rayt

    in reply to: VTD 00 #205388
    ray.t
    Participant

    Re: VTD 00

    Does anyone know if the hotpoint disc has wiring diagrams on it

Viewing 14 posts - 241 through 254 (of 254 total)