ray.t

Forum Replies Created

Viewing 15 posts - 211 through 225 (of 254 total)
  • Author
    Posts
  • in reply to: Neff V4380xogb/13 washer dryer #315032
    ray.t
    Participant

    Re: Neff V4380xogb/13 washer dryer

    I dont know. I asked him what was happening and he said the clothes were just wet at the end but he then said that they were a bit warm.
    How do you get to the bottom hose of the condensor does the front have to come off?
    He did say that he uses the dryer alot so it could just be that its blocked up.
    Cheers
    Ray

    in reply to: Neff V4380xogb/13 washer dryer #315029
    ray.t
    Participant

    Re: Neff V4380xogb/13 washer dryer

    Thanks for that. I have just spoken to the tenant and he has told me that the clothes come out wet and warm at the end. He has been in the property for 7 years so does know how to use it.
    Are you saying that it is normal for there to be no water through the valves to the condensor on those settings? If so how does the condensor work?
    I didnt check the hose, does the front come off to gain access to the condensor/hose
    Thanks for your help
    Ray

    in reply to: Bosch WFL2062GB/12 #313506
    ray.t
    Participant

    Re: Bosch WFL2062GB/12

    Thanks for that I will check it out.
    Cheers, Ray

    in reply to: Indesit WI 121 pcb on WI 101 will it work #312338
    ray.t
    Participant

    Re: Indesit WI 121 pcb on WI 101 will it work

    Hi The machine works fine. I have run it through a few washes now and all seems ok.
    Cheers, Ray

    in reply to: Indesit WI 121 pcb on WI 101 will it work #312335
    ray.t
    Participant

    Re: Indesit WI 121 pcb on WI 101 will it work

    Thanks. As the washing machine was going to be scrap if I couldn’t fix it I thought I would give it a go. Tried it on 2 washes last night and it seems to work ok.
    I will try a few more washes today and see what happens.
    Thanks, Ray

    in reply to: Indesit Door #312035
    ray.t
    Participant

    Re: Indesit Door

    I have a second hand one of these in the garage mate, yours for the price of the postage.
    I was going to scrap this machine today but can grab the door off it if you want.
    Ray

    in reply to: Bosch SGS69A02GB/20 #311016
    ray.t
    Participant

    Re: Bosch SGS69A02GB/20

    Thanks I will give it a go.
    Cheers
    Ray

    in reply to: Bosch SGS69A02GB/20 #311013
    ray.t
    Participant

    Re: Bosch SGS69A02GB/20

    Hi Bob thanks for that. Does the chamber being blocked also cause the intermittent filling.

    Thanks
    Ray

    in reply to: Bosch SHV 43A03GB/44 #305258
    ray.t
    Participant

    Re: Bosch SHV 43A03GB/44

    Thanks Martin for that. I have spoken to the customer again and he has told me that after we left he tried it again and now only the bottom spray arm will work. Can these cause intermitent problems. He has complained that the dishes are still dirty at the end of the cycle and that the soap has not been washed away from the dispenser, but not every time sometimes it does wash ok.
    Thanks again Ray

    in reply to: Bosch Shv43a03gb #302451
    ray.t
    Participant

    Re: Bosch Shv43a03gb

    Hi Thanks for that. No I am not sure its not backing up. Do the pressure chambers need cleaning or just replacing.
    Ray.

    in reply to: Whirlpool AWM 045 #300195
    ray.t
    Participant

    Re: Whirlpool AWM 045

    Thanks very much for that, I shall pass on the good news.
    Cheers Ray

    in reply to: Bosch SGS45E68GB/68 Dishwasher #298655
    ray.t
    Participant

    Re: Bosch SGS45E68GB/68 Dishwasher

    Just in case anyone is using the search button. I fitted the above part and the machine is now working just as it should.
    Thanks Again Ray

    in reply to: Bosch SGS45E68GB/68 Dishwasher #298654
    ray.t
    Participant

    Re: Bosch SGS45E68GB/68 Dishwasher

    Thanks for that I will give it a try and report back.
    Cheers Ray

    in reply to: Bosch SGS45E68GB/68 Dishwasher #298652
    ray.t
    Participant

    Re: Bosch SGS45E68GB/68 Dishwasher

    Hi, Thanks I have taken the panel off and had a look, all the hoses look like new.
    I can hear the pump come on and off its not syphoning and its doing it as it fills.
    Cheers Ray

    in reply to: Hotpoint CTD40G #292834
    ray.t
    Participant

    Re: Hotpoint CTD40G

    Thanks for that. I will go and check again.
    Cheers Ray

Viewing 15 posts - 211 through 225 (of 254 total)