[ray.t]

Re: W/pool AWG349/4 Washer Dryer 8537 3041 5400

Hi, Yeah the fan runs fine. I left it on dry for a while and the heater element had constant power so I think its thermostat/ntc related.
Thanks
Ray

[ray.t]

Re: ewx1440wd PRD no 914602300 washer dryer

Thanks Mike, I will give that a try.
Ray

[ray.t]

Re: Neff V4380xogb/13 washer dryer

I went back to this one and checked the condenser to see if it was blocked.
The hose and condenser assy are all spotless.
Should this machine do a 5-10min cool down at the end of the dry cycle?
The water valve is working fine I can hear it spurting water through every few seconds.
Also the pump seems to be working fine.
Cheers
Ray

[ray.t]

Re: Hoover SE264-80

Thanks for that.
Ray

[ray.t]

Re: Hoover SE264-80

Yes mate its 31000830 0518 7515
Thanks
Ray

[ray.t]

Re: motor brushes melting?

Could it be not draining properly?

[ray.t]

Re: WD12X

I dont know, I looked in the book but it doesn’t mention it.
I have another indesit machine in the workshop and on that one it says light rinse.
Cheers
Ray

[ray.t]

Re: WD12X

Hi, I thought first it could of been syphoning as the machine seemed to keep taking in water but I checked the drain and its all ok.
Heater is fine, it goes through the wash fine its just when it gets to the symbol just before rinse.
The symbol looks the same as the rinse symbol but has no line on the top and the lines in the symbol are not as heavy.
I looked in the user guide but there is no mention of this symbol
Thanks
Ray

[ray.t]

Re: WD12X

Sorry been one of those days. Intergrated indesit.
Thanks
Ray

[ray.t]

Re: Stair trolley/truck

Thanks, I did think the height could be a problem.
I think I will look at just the 3 wheel type, unless anyone knows of anything else that is better?
Cheers
Ray

[ray.t]

Re: Hotpoint Dishwasher

Thanks Again.
I will order one and see how I go.
Cheers
Ray

[ray.t]

Re: Hotpoint Dishwasher

Thanks for that, but that part on connect comes up as a timer?

[ray.t]

Re: Hotpoint Dishwasher

Thanks for the info. I have checked on Connect and it seems the pcb is nla.
Cheers
Ray

[ray.t]

Re: Aquastop Hose

I have fitted the hose to the machine and at first it did take in some water and I thought all was ok.
Since then the machine will only work on spin or drain and the machine wont take in any water, but the check water light is not lit?
Anyone else know if I should just bridge the aquastop connection?
Thanks
Ray

[ray.t]

Re: Aquastop Hose

Do you know if the machine will work with a normal fill hose?

[Author]

Posts