rickard

Forum Replies Created

Viewing 15 posts - 106 through 120 (of 200 total)
1 2 3 … 7 8 9 … 12 13 14
  • Author
    Posts
  • August 20, 2010 at 8:39 am in reply to: neff S4132W0GB #328321
    rickard
    Participant

    Re: neff S4132W0GB

    Thanks martin, yes there is water to the aquastop even changed it around with the w/m. There is a microswitch on the flood protection where the aquastop is connected but that is working ok. thanks andy

    August 20, 2010 at 8:06 am in reply to: neff S4132W0GB #328319
    rickard
    Participant

    Re: neff S4132W0GB

    Thanks for your reply. I have taken the small pipe on the bottom front of the tank off and tried it again but it still just buzzes this is the clear pipe that runs along with the fill hose back upto the aquastop. I have tried it with this clear pipe off also with the fill pipe off and with them both off. no matter what pipes i try the aquastop still just buzzes, hope you can help with this. Many thanks Andy

    July 9, 2010 at 3:43 pm in reply to: Sheffield 110 #325026
    rickard
    Participant

    Re: Sheffield 110

    No not a rangemaster, zanussi ones wont fit. height 230mm width 195mm bracket 70mm tags 50mm with a center hole 2500 watt.
    Andy

    May 21, 2010 at 4:02 pm in reply to: Indesit DI620uk #320840
    rickard
    Participant

    Re: Indesit DI620uk

    Many thanks Jim
    Andy

    May 18, 2010 at 3:30 pm in reply to: DESIGN AIR COOKER HOOD #320523
    rickard
    Participant

    Re: DESIGN AIR COOKER HOOD

    Its a Cata cooker hood, parts available from isdal.
    Andy

    March 5, 2010 at 8:20 pm in reply to: Diplomat ADP6101 #313975
    rickard
    Participant

    Re: Diplomat ADP6101

    Thanks for your help the label was rubbed off slightly so must be 8010.
    Many Thanks

    February 15, 2010 at 7:48 pm in reply to: MAYTAG CONTROL BOARD PART NO. 61004516 #312081
    rickard
    Participant

    Re: MAYTAG CONTROL BOARD PART NO. 61004516

    $111 + $15 p+p direct from the states. I buy all my maytag parts from this company never let me down yet. 5 days delivery but thats not much different than from maytag croydon, they use the exchange rate at the time of dispatch. http://www.pcappliancerepair.com
    Andy

    January 26, 2010 at 5:30 pm in reply to: Admiral FF GC2224GEKB #310076
    rickard
    Participant

    Re: Admiral FF GC2224GEKB

    you have got to configure the board yourself before using it.
    Andy

    January 14, 2010 at 3:57 pm in reply to: Belling d/w #308785
    rickard
    Participant

    Re: Belling d/w

    The part number i have from masterpart shows it as either a merloni or another picture shows it as a brandt
    Andy

    December 18, 2009 at 6:05 pm in reply to: Hotpoint hinges #306728
    rickard
    Participant

    Re: Hotpoint hinges

    Thanks very much Jim a much more realistic price
    Andy

    December 17, 2009 at 10:51 pm in reply to: HOTPOINT RSAV21 #306683
    rickard
    Participant

    Re: HOTPOINT RSAV21

    Thanks Jim

    November 24, 2009 at 3:39 pm in reply to: creda 48273 #304665
    rickard
    Participant

    Re: creda 48273

    Many Thanks Bob
    That is the ones iam looking for.
    Andy

    October 20, 2009 at 4:40 pm in reply to: 6ft-ish / 170-190cm upright freezers – NOT FROST FREE #299700
    rickard
    Participant

    Re: 6ft-ish / 170-190cm upright freezers – NOT FROST FREE

    Gorenje in stock at DAD at 177 high

    October 20, 2009 at 4:33 pm in reply to: GC2224GEKW – Maytag American Style #299959
    rickard
    Participant

    Re: GC2224GEKW – Maytag American Style

    Yes it comes as a complete package even get a drier with it. Order direct with the states as it will be a lot cheaper.

    September 22, 2009 at 3:55 pm in reply to: under counter f/f #297715
    rickard
    Participant

    Re: under counter f/f

    Thanks Don
    Sorry i clicked on the wrong forum heading
    Andy

  • Author
    Posts
Viewing 15 posts - 106 through 120 (of 200 total)
1 2 3 … 7 8 9 … 12 13 14