Forum Replies Created
-
Posts
-
Re: Zanussi ZKG7145 not drying
Thanks for your help guys, I will return this weekend to machine. I will update on result.
Thanks for advice on this one, float switch was stuck giving machine idea it was sitting in water and wouldn’t work.
Re: fault codes pdf
Great Idea send me a copy thanks.
rbegges@hotmail.com
Robbie BeggRe: Kenwood error codes
Thanks for reply, sorry should have said model is KDW243A and it has a electronic display which shows E3.
Re: Electrolux built in oven
Thanks guys fitted new part and oven working fine, Made a hint to invite me for Sunday roast but no luck 😥
Re: Electrolux built in oven
Thanks for reply this one seems to be on four wires covered with a heat shrink sleeve, I cut it open and there is a small disc in centre with a loop of wire over top. Can’t find it on spare parts list though.
Re: W/pool AWZ650 T/d
Hi there is power getting to motor? problem sounds like over temp cutout in motor, check between controller terminal 10 or 11 and neutral which will tell you if power is flowing through motor. I will get wiring diagram sorted out for you tomorow friday.
Re: Zanussi ZSF6160 DISHWASHER
Thanks for help it was solder joint on main board, resoldered and machine working fine. Thanks again.
Re: Zanussi ZSF6160 DISHWASHER
Was back at machine today and ran the test program you sent me Dave and seems to not taking enough water in, solinoid opens for 20 seconds and thats it, according to manual it should open for 60 seconds and should cut out when pressure switch closes. I have checked water supply, pressure switch, pipework etc all fine. Checked filter in bottom and sump but no blockages. I have taken it back to workshop see if I can find problem.
Re: Cooker Hood Venting
Yes this is allowed as long as extract rate from cooker hood is suitable for size of kitchen, best way is to check extract rate which is marked on label inside hood, measure size of room in square mtrs go to local council office and ask planning if it will okay.
Re: Zanuusi DA6152 Dishwasher
Thanks for quick reply guys, will give these a go .I have just joined UKW so hope to help out all I can.
Re: Whirlpool american fridge freezer board codes needed
Hi there if you can give me a list of numbers I have disc that can help identify and match boards. The new control boards that are coming out have a test sequence built in and makes it very handy for fault finding don,t even have to move appliance.
Re: slush puppie
Hi there what make of slush machine is it, there is an overnight chill switch on my two that needs to be switched over in moning. Is comressor switching on? I have two machines in my shop and they take roughly an hour to make slush but it starts to form after five mins. Get back to me and i will try to help.If he gets them working Mega profit !!
