robbo1973

Forum Replies Created

Viewing 15 posts - 391 through 405 (of 644 total)
  • Author
    Posts
  • in reply to: comp horsepower #260365
    robbo1973
    Participant

    Re: comp horsepower

    sorry the make is the acc (or that is what it looks like) r600a fitted to a servis f/frzr not sure on model at mo.

    in reply to: cda ci920 t/dryer #260142
    robbo1973
    Participant

    Re: cda ci920 t/dryer

    thyanks mate really appreciate the partnos etc.

    chris

    in reply to: ctd00 no motor action #259978
    robbo1973
    Participant

    Re: ctd00 no motor action

    done one last week timer was faulty but with no motor action the stats had blown as well.

    cheers chris.

    in reply to: ew1200i #259968
    robbo1973
    Participant

    Re: ew1200i

    would that czuse the dryer fan to kick in during the rinse?dont know if heaters come on as lid back on and refit.

    in reply to: AWG349/3 WASHER DRYER #259666
    robbo1973
    Participant

    Re: AWG349/3 WASHER DRYER

    :tup:

    thanks matey.

    in reply to: AWG349/3 WASHER DRYER #259664
    robbo1973
    Participant

    Re: AWG349/3 WASHER DRYER

    some times have trouble with one on my profile so i posted it on my first post cheers.

    in reply to: AWG349/3 WASHER DRYER #259661
    robbo1973
    Participant

    Re: AWG349/3 WASHER DRYER

    have you any tech info or anything on these there are a lot in a development close to me.also are these dryer modules unreliable and is this the large board at the bottom?

    cheers chris

    in reply to: APM6855 #259475
    robbo1973
    Participant

    Re: APM6855

    just done the search with apm6855 no gap abd it brings about 27 threads up a lot re fridge not cold i only know because i have had a few of these in the past either fan motors or def sensors.

    cheers chris.

    in reply to: baumatic hood bc82gl #257852
    robbo1973
    Participant

    Re: baumatic hood bc82gl

    hi i received this transformer from baumatic it is 11.5volt the one coming off is 12 volt for the lights.also how do you get into the switch assy looks a nightmare?i will post in the trade tech as well.

    cheers chris

    in reply to: smeg wdi12c #259584
    robbo1973
    Participant

    Re: smeg wdi12c

    that was quick thanks

    in reply to: APM6855 #259473
    robbo1973
    Participant

    Re: APM6855

    try the search loads on these i have one at the minute icing up defrost sensors are prone to failure as is the fan motor or reed switch.

    cheers chris

    in reply to: Teaching your Grandmother #259416
    robbo1973
    Participant

    Re: Teaching your Grandmother

    Hi Steve good advice as i ended up in hospital for a week with something in my knee but there was no mark so didnt know what couldnt walk the pain was unbearable.Iwas on a drip every 4 hours 24 hours a day then after 5 days it started to come down after they said they where gonna cut it open and have a look.now when i cant kneel on hard surfaces as it feels like i am kneeling on rocks so always where pads.

    cheers chris

    in reply to: apm8721 #258430
    robbo1973
    Participant

    Re: apm8721

    this turned out to be the philips type with no spout but the serial number is def a merloni strange.

    in reply to: Electrolux EWD1409i washer drier. #258467
    robbo1973
    Participant

    Re: Electrolux EWD1409i washer drier.

    had a aeg exactly the same changed the main pcb and i/lock and it had also done the front board as well hope this helps.

    in reply to: samsung rl39wbns – defrosting intermittantly. #259133
    robbo1973
    Participant

    Re: samsung rl39wbns – defrosting intermittantly.

    prob the main heater dicconnect from tray heater and meter i have changed quite a few for this fault when it cuts out and heater should come on it waits for the sensor to cut it back in but because no heat it takes forever therefore everything defrosts.

    cheers chris

Viewing 15 posts - 391 through 405 (of 644 total)